Tag: samsung

All the articles with the tag "samsung".

• Samsung Washer Smells Like Mildew - Causes & Fix

  8 Jun, 2026

  Trapped moisture and detergent residue in the door seal, tub, or drawer cause mildew odor. Run Self Clean with bleach and wipe dry.

• Samsung Washer Won't Agitate - Causes & Fix

  8 Jun, 2026

  Most often caused by a failed clutch position sensor or worn clutch assembly. Unplug, inspect the clutch sensor and wiring, test with a meter, and replace the faulty component.

• Samsung Washer Burning Smell - Causes & Fix

  8 Jun, 2026

  Usually motor insulation odor on first 1-2 cycles (normal), or overheating drive components if smell persists after break-in.

• Samsung Washer Not Draining Completely - Causes & Fix

  8 Jun, 2026

  Clogged pump filter is the most common cause. Clean the debris trap on front-load models and check the drain hose for kinks.

• Samsung DVE45R6100W Dryer Problems & Error Codes

  8 Jun, 2026

  Door error codes (dO/dE) are most common on this model, usually fixed by adjusting the door latch or replacing the door switch assembly.

• Samsung Oven tE Error Code - Causes & Fix

  7 Jun, 2026

  Samsung oven tE code signals a temperature sensor or thermistor circuit fault. The most common fix is replacing the oven temperature sensor.

• Samsung Microwave Waveguide Cover Replacement - Signs & How-To

  7 Jun, 2026

  Sparking, popping, or burn marks inside the cavity mean your waveguide cover is damaged. Replacing the mica sheet stops arcing and protects the magnetron.

• Samsung Oven Surface Burner Element Replacement - Signs & How-To

  7 Jun, 2026

  Cooktop burner won't heat, only partial heating on dual elements, or visible burn marks mean a failed element or control switch. Replacing the surface burner element or infinite switch restores function.

• Samsung Dishwasher Drain Hose Replacement - Signs & How-To

  7 Jun, 2026

  Leaking base, LC code, standing water, and pooling under the unit mean a damaged or kinked drain hose. Replacing it stops leaks and draining faults.

• Samsung Dishwasher Door Latch/Lock Assembly Replacement

  7 Jun, 2026

  Door won't latch, dishwasher won't start, or machine stops mid-cycle. Replacing the door latch/lock assembly fixes failed switches and broken latches.

• Samsung Washer HC Error Code - Causes & Fix

  7 Jun, 2026

  HC means heater error on Samsung washers. The machine detected an abnormal heating condition. Check the heater element and temperature sensor first.

• Samsung E-36 Error Code - Causes & Fix

  7 Jun, 2026

  E-36 on Samsung mini-splits means lost communication between indoor and outdoor units. Check wiring and outdoor fuse first.

• Samsung HR Error Code - Causes & Fix

  7 Jun, 2026

  HR means heater error on Samsung washers. Most often caused by reversed hot/cold hoses. Swap hoses so hot supply connects to hot inlet.

• Samsung Washer bE4 Error Code - Causes & Fix

  7 Jun, 2026

  bE4 can mean unbalanced load or water-supply fault depending on your model. Most often a kinked hose or closed tap; check supply first.

• Samsung Washer dE2 Error Code - Causes & Fix

  7 Jun, 2026

  dE2 means door not latched or lock not confirming (varies by model). Most often: laundry caught in door or loose strike. Close firmly & retry.

• Samsung bE0 Error Code - Causes & Fix

  7 Jun, 2026

  Samsung bE0 means a control-panel button is stuck or continuously pressed. Free stuck buttons and clean moisture from the keypad first.

• Samsung Microwave C-d1 Error Code - Causes & Fix

  7 Jun, 2026

  C-d1 means the door lock or sensor is not detecting a closed position. Most often a faulty door latch or lock switch. Power-cycle first.

• Samsung Washer UC Error Code - Causes & Fix

  7 Jun, 2026

  UC means power supply or voltage problem. Most often caused by unstable line voltage or using an extension cord. Plug directly into a dedicated circuit.

• Samsung Washer UB Error Code - Causes & Fix

  7 Jun, 2026

  UB means unbalanced load. The drum is weighted to one side during spin. Pause, untangle and redistribute laundry, then restart.

• Samsung Washer tE2 Error - Causes & Fix

  7 Jun, 2026

  tE2 means a temperature sensor circuit fault. Most often a bad thermistor or loose connector. Check wiring and sensor resistance first.

• Samsung tE1 Error Code - Causes & Fix

  7 Jun, 2026

  tE1 on Samsung washers means a temperature-sensor fault. Most often a bad sensor or loose connector. Check the thermistor first.

• Samsung Washer tE Error Code - Causes & Fix

  7 Jun, 2026

  tE means temperature sensor fault. Most often a failed thermistor or loose connector. Check sensor resistance and wiring first.

• Samsung Washer tC Error Code - Causes & Fix

  7 Jun, 2026

  tC means thermistor/temperature sensor fault. Most common fix: replace the failed thermistor or repair damaged wiring to the sensor.

• Samsung SUD Error Code - Causes & Fix

  7 Jun, 2026

  SUD means too many suds detected in the drum. Most often caused by too much detergent or non-HE detergent. Reduce dose and run rinse cycle.