Skip to content
Industrial Error Code Fixes
Go back

Bosch Commercial Dishwasher E-Codes — Guide

⚡ Quick Answer

Bosch commercial dishwasher E-codes: what each means and how to fix it.

⚡ AT A GLANCEScroll down for full repair guide
What it meansBosch commercial dishwasher E-codes: what each means and how to fix it.
Most likely causeMost refrigeration faults come from power, airflow, sensor, drain, ignition, or control-board conditions. Start with the lowest-risk checks before replacing parts.
First checkConfirm the exact code, power-cycle once, inspect the obvious safety/flow path, then follow the step-by-step checks below.
Repair time10-45 minutes for basic checks
Repair intent

Need this fixed instead of diagnosed?

Bosch commercial dishwasher E-codes: what each means and how to fix it.

Bosch Commercial Dishwasher E-Codes — What They Mean

Bosch commercial dishwashers (undercounter, door-type, and conveyor models) display E-codes when faults occur. Bosch commercial equipment is common in hotel, restaurant, and healthcare food service operations.

CodeMeaningUrgency
E1Water inlet faultMedium
E2Drain faultMedium
E3Water temperature too lowMedium
E4Overflow faultHigh
E5Wash pump motor faultHigh
E6Final rinse temperature lowHigh
E7Heating element faultMedium
E8Detergent system faultLow
E9Door lock faultMedium

Jump to Fix

Common Fixes

E1 (water inlet): Check supply valve is fully open. Verify supply pressure (20-80 PSI). Clean the inlet valve screen. Test solenoid coil resistance.

E3/E6 (temperature faults): The wash tank or final rinse isn’t reaching required temperature. Check booster heater element continuity. Verify incoming hot water temperature is at least 140°F.

E5 (wash pump fault): Most urgent fault — no washing occurs. Check pump impeller for blockage. Test motor windings. Verify supply voltage.

E4 (overflow): Drain is blocked or drain pump has failed. Check drain line for blockage. Test drain pump operation.

Parts Often Needed

PartNotes
Booster heater elementFor E3/E6 temperature faults
Wash pump motorFor E5 — most urgent repair
Water inlet valveFor E1
Drain pumpFor E2/E4

Need Replacement Parts?

Finding the right replacement parts for your equipment is critical to getting it running again. Check current prices on Amazon — prices and availability change frequently.

When to Call a Pro

High-voltage heating element and control board work requires a qualified appliance or commercial kitchen equipment technician.


Need a professional? Compare certified Refrigeration repair options before replacing parts.
Get Repair Quotes
Share this post on:

Previous Post
Amana ASX Air Conditioner Error Codes — Fault Code Diagnostic Guide
Next Post
Carrier 48XLC Packaged Unit Error Codes — Fault Code Diagnostic Guide