Fujimak Commercial Dishwasher Fault Codes ΓÇö What They Mean
Fujimak is a Japanese commercial foodservice equipment brand whose dishwashers are common in Japanese and Asian fusion restaurants, hotel operations, and institutional kitchens across Asia and increasingly the US.
| Code | Meaning | Urgency |
|---|---|---|
| E1 | Water level fault / fill timeout | Medium |
| E2 | Drain fault | Medium |
| E3 | Wash temperature below setpoint | Medium |
| E4 | Final rinse temperature below setpoint | High |
| E5 | Wash pump motor fault | High |
| E6 | Booster heater fault | Medium |
| E8 | Door interlock fault | Medium |
Most Common Fujimak Fixes {#fix}
E1 (water level/fill): Verify water supply valve is fully open. Check supply pressure (minimum 0.5 bar). Clean the water inlet valve filter. If the unit has a rinse water softener, verify it’s regenerating correctly.
E3/E4 (temperature): Fujimak machines require 60┬░C (140┬░F) wash and 82-85┬░C (180-185┬░F) rinse. Check the booster heater element continuity. On models with steam injection, verify steam supply. Low incoming water temperature extends heat-up time and causes E3/E4.
E5 (wash pump): Check for glass fragments or debris in the pump sump filter (clean it every day). Test pump motor. Fujimak pumps are reliable but debris is the most common cause of pump failure.
Parts Often Needed
| Part | Notes |
|---|---|
| Booster heater element | Amazon | For E4/E6 temperature faults |
| Pump motor | Amazon | For E5 ΓÇö match voltage and HP |
| Water inlet valve | Amazon | For E1 |
When to Call a Pro
Fujimak authorized service in the US handles component replacement and commissioning. Contact Fujimak USA or an authorized service agent for persistent faults.