Skip to content
Industrial Error Code Fixes
Go back

More industrial fault codes

Fuji Frenic-Mini VFD Fault Codes Guide

⚡ Quick Answer

Fuji Frenic-Mini VFD fault codes explained. Learn the common overcurrent, overvoltage, undervoltage, ground fault, and memory errors on Fuji drives.

⚡ AT A GLANCEScroll down for full repair guide
What it meansFuji Frenic-Mini VFD fault codes explained. Learn the common overcurrent, overvoltage, undervoltage, ground fault, and memory errors on Fuji drives.
Most likely causeMost fuji faults come from power, airflow, sensor, drain, ignition, or control-board conditions. Start with the lowest-risk checks before replacing parts.
First checkConfirm the exact code, power-cycle once, inspect the obvious safety/flow path, then follow the step-by-step checks below.
⏱Repair time10-45 minutes for basic checks
🔧Part neededDrive cooling fan

Likely parts to price

Price the common parts before you book service.

Drive cooling fan

Common heat-related VFD and servo-drive failure point.

Keypad operator panel

Useful when the drive display or controls fail.

Braking resistor

Price this on braking, deceleration, and overvoltage faults.

Equipment service manual download (eManualOnline)

The full OEM-style workshop manual has the wiring diagram, test values, and the fault table this guide summarizes. Instant PDF download.

Repair intent

Need this fixed instead of diagnosed?

Fuji Frenic-Mini VFD fault codes explained. Learn the common overcurrent, overvoltage, undervoltage, ground fault, and memory errors on Fuji drives.

Fuji Frenic-Mini Fault Codes

Fuji Frenic-Mini drives are compact and reliable, but their faults still fall into the usual VFD categories: current, voltage, thermal, and memory issues.

Common Fuji Faults

FaultMeaningQuick Fix
OC1Overcurrent during accelIncrease accel time, check load
OC2Overcurrent during decelIncrease decel time
OC3Overcurrent during runCheck motor short or sudden load
OU1Overvoltage during accelCheck supply and regen
OU2Overvoltage during decelLengthen decel, add braking
LUUndervoltageCheck line sag or loose terminals
OH1Drive overtemperatureClean heatsink and fan
EFExternal tripCheck external fault input
Er1Memory / keypad faultPower cycle, inspect control section

Need Replacement Parts?

Before ordering, match the drive part to the model number, electrical rating, and failure symptom. Check current prices on Amazon - prices and availability change frequently.

Practical Troubleshooting

Bottom Line

Fuji Frenic faults are usually tied to how aggressively the drive is tuned versus the actual machine load. Start with motor data, accel/decel times, and cooling.


Need a professional? Compare Industrial repair options before replacing parts.
Compare Repair Options
Share this post on:

Previous Post
Eaton VFD and Soft Starter Fault Codes: PowerXL, S811
Next Post
Hitachi WJ200 / WL200 VFD Fault Codes Guide