Tag: washer

All the articles with the tag "washer".

• Maytag Washer F22 Error Code - Causes & Fix

  30 May, 2026

  F22 means the door lock is not engaging or reporting correctly. Most often fixed by clearing obstructions or replacing the door lock.

• Maytag Washer F20 Error Code - Causes & Fix

  30 May, 2026

  F20 means the washer didn't fill with water in time. Check that both hot and cold water valves are open and hoses aren't kinked.

• Maytag Washer F11 Error Code - Causes & Fix

  30 May, 2026

  F11 means a motor control communication fault. Most often the machine control board or motor control unit has failed and needs replacement.

• Maytag F07 Error Code - Causes & Fix

  30 May, 2026

  F07 on Maytag top-load washers means laundry detected during Clean Washer cycle. Remove all items from tub, clear code, and restart cycle.

• Maytag Washer d13 Error Code - Causes & Fix

  30 May, 2026

  d13 is not a standard Maytag code. It's likely a misread of dL, SD, F3 E1, or F9 E1. Verify the exact display, reset, then check drain and suds.

• Maytag Washer d9 Error Code - Causes & Fix

  30 May, 2026

  d9 on a Maytag washer means low voltage detected at the control. Most often fixed by checking the outlet, power cord, and internal connections.

• Maytag Washer d8 Error Code - Causes & Fix

  30 May, 2026

  d8 means slow drain detected on legacy Maytag top-loaders. Most often caused by a kinked drain hose or clogged pump. Clear path and test.

• Maytag d7 Error Code - Causes & Fix

  30 May, 2026

  d7 means slow fill detected. Check both supply valves are fully open, clean inlet screens, and inspect hoses for kinks or restrictions.

• Maytag Washer D5 Error Code - Causes & Fix

  30 May, 2026

  D5 (or Sd/5d) on most Maytag washers means excess suds detected. Most common fix: let the washer run its suds routine and switch to HE detergent.

• Maytag Washer D3 Error Code - Causes & Fix

  30 May, 2026

  D3 is not a standard Maytag code. Most likely you're seeing F3 E1, a water-level pressure sensor fault. Check the pressure hose first.

• Maytag Washer D1 Error Code - Causes & Fix

  30 May, 2026

  D1 means water level circuit failure on the control board. Most common fix: replace the main control board after checking wiring.

• LG Washer E21 Error Code - Causes & Fix

  30 May, 2026

  E21 means your LG washer can't drain water on time. Most often a clogged drain filter or kinked hose is blocking flow. Clear the filter first.

• LG Washer E03 Error Code - Causes & Fix

  30 May, 2026

  E03 on LG washers means the machine cannot drain water. The most common fix is cleaning the clogged drain pump filter and hose.

• LG Washer UE Error Code - Causes & Fix

  30 May, 2026

  UE means unbalanced load. The washer can't spin because laundry is bunched on one side or the machine isn't level. Redistribute and check feet.

• LG Washer FE Error Code - Causes & Fix

  30 May, 2026

  FE means your LG washer is overfilling. The water inlet valve is usually stuck open or leaking. Turn off water and replace the valve.

• LG Washer AE Error Code - Causes & Fix

  30 May, 2026

  AE means the leak sensor detected water in the base pan. Most often caused by a torn door boot or excess suds. Dry the pan and find the leak.

• LG Washer CL Error Code - Causes & Fix

  30 May, 2026

  CL on an LG washer means Child Lock is on, not a fault. Press and hold the Child Lock button for 3-5 seconds to turn it off.

• LG Washer Cd Error Code - Causes & Fix

  30 May, 2026

  Cd on LG washer-dryer combos means Cool Down mode after drying, not a fault. Press START/PAUSE to clear and wait 2 minutes for unlock.

• LG Washer SUD Error Code - Causes & Fix

  30 May, 2026

  SUD means too many suds detected. The washer adds up to 2 hours to reduce foam. Fix: use less HE detergent and let the cycle finish.

• LG Washer HE Error Code - Causes & Fix

  30 May, 2026

  HE means temporary heater error. Power reset: unplug 10 seconds, restart. If it repeats, the heater circuit needs service.

• LG Washer tE Error Code - Causes & Fix

  30 May, 2026

  tE means a heating or temperature-sensing error. The thermistor (temp sensor) is usually faulty and needs replacement.

• LG Washer SE Error Code - Causes & Fix

  30 May, 2026

  LG SE error means a motor sensor fault. Most often the motor assembly or hall sensor has failed. Power reset first, then check motor.

• LG Washer PF Error Code - Causes & Fix

  30 May, 2026

  PF means your LG washer detected a power failure during the cycle. Usually you can press START/PAUSE and resume after an outage.

• LG Washer PE Error Code - Causes & Fix

  30 May, 2026

  PE means Pressure Error: the water-level sensor system has failed. Most often a kinked or clogged pressure hose. Check hose first.