Tag: washer

All the articles with the tag "washer".

• Frigidaire Washer E13 Error Code - Causes & Fix

  30 May, 2026

  E13 means water leak or pressure-sensor air hose leak. Check under the tub for leaks and inspect the pressure hose for disconnects or cracks.

• Frigidaire E11 Error Code - Causes & Fix

  30 May, 2026

  E11 means your Frigidaire washer is not filling with water fast enough. Check water supply valves first, then inlet screens and hoses.

• Frigidaire Washer E4 Error Code - Causes & Fix

  30 May, 2026

  E4 means your Frigidaire washer detected an out-of-balance load and stopped the spin. Redistribute laundry evenly and check leveling.

• Frigidaire E1 Error Code - Causes & Fix

  30 May, 2026

  E1 on Frigidaire washers usually means slow or no fill. Check that both shutoff valves are fully open and inlet screens are clean.

• Maytag Washer LC Error Code - Causes & Fix

  30 May, 2026

  LC or LoC means Control Lock is activated, not a failure. Press and hold the Control Lock button for 3–5 seconds to clear the code.

• Maytag Washer DRN Error Code - Causes & Fix

  30 May, 2026

  DRN means your Maytag washer is draining too slowly. Check drain hose position and remove clogs from the hose or pump to fix it.

• Maytag LdU Error Code - Causes & Fix

  30 May, 2026

  LdU means lid cannot unlock. Usually caused by objects on the lid or detergent buildup blocking the lock. Remove obstructions and reset.

• Maytag LdL Error Code - Causes & Fix

  30 May, 2026

  LdL means the lid is not locking. Remove items under the lid and clean detergent buildup around the lock to fix most cases.

• Maytag HC Error Code - Causes & Fix

  30 May, 2026

  HC means hot and cold inlet hoses are reversed. Swap the hoses at the back of the washer or at the wall faucets to clear the code.

• Maytag F8 E1 Error Code - Causes & Fix

  30 May, 2026

  F8 E1 means your Maytag washer isn't getting enough incoming water. Check that both supply valves are fully open and clean the inlet screens.

• Maytag F8 E2 Error Code - Causes & Fix

  30 May, 2026

  F8 E2 means a dispenser system problem on Maytag front-load washers. Clean the detergent drawer and cartridge to remove residue buildup.

• Maytag F7 E1 Error Code - Causes & Fix

  30 May, 2026

  F7 E1 means the motor can't reach the correct speed. Most often a stuck drum, loose wire, or failed speed sensor is the culprit.

• Maytag F74 Error Code - Causes & Fix

  30 May, 2026

  F74 on a Maytag washer means a motor control or drive system fault. Most often fixed by resetting power or replacing the motor control unit.

• Maytag F7 E1 Error Code - Causes & Fix

  30 May, 2026

  F7 E1 means motor speed sensing error. Most common fix: remove shipping bolts still installed on drum or reset the washer.

• Maytag F73 Error Code - Causes & Fix

  30 May, 2026

  F73 means communication failure between the console and main control. Most often fixed by reseating wiring or replacing the UI board.

• Maytag Washer F71 Error Code - Causes & Fix

  30 May, 2026

  F71 signals a motor speed sensing or drive engagement fault. On front-loaders, replace the motor control unit. On top-loaders, check the drive hub.

• Maytag Washer F70 Error Code - Causes & Fix

  30 May, 2026

  F70 means a communication fault between control boards. Most likely fix: power-cycle for 5 minutes, then check board connectors.

• Maytag F34 Error Code - Causes & Fix

  30 May, 2026

  F34 means items detected in the tub during Clean Washer cycle. Remove all items from the drum, clear the code, and restart the cycle.

• Maytag Washer F33 Error Code - Causes & Fix

  30 May, 2026

  F33 means the control cannot communicate with the drain pump. Most often caused by loose wiring or a blocked pump impeller.

• Maytag F32 Error Code - Causes & Fix

  30 May, 2026

  F32 means the washer isn't draining fast enough. Most often a clogged pump or kinked hose is blocking water flow during the drain cycle.

• Maytag Washer F27 Error Code - Causes & Fix

  30 May, 2026

  F27 means overflow detected by the pressure switch. Most often caused by a stuck inlet valve or faulty pressure hose.

• Maytag Washer F29 Error Code - Causes & Fix

  30 May, 2026

  F29 means the door lock failed to unlock after a cycle. Most often the door latch assembly is defective or the door hook is misaligned.

• Maytag Washer F24 Error Code - Causes & Fix

  30 May, 2026

  F24 means temperature sensor fault on most Maytag front-loaders or overload/excess water on compact models. Check your model first.

• Maytag Washer F25 Error Code - Causes & Fix

  30 May, 2026

  F25 means the control isn't getting a valid speed signal from the motor tachometer. Most often you need to replace the drive motor.