Tag: oven

All the articles with the tag "oven".

• KitchenAid Oven F6 E9 Error Code - Causes & Fix

  31 May, 2026

  F6 E9 means lower oven communication fault. Usually fixed by power reset or replacing the lower oven appliance manager or its wiring.

• KitchenAid F6 E7 Error Code - Causes & Fix

  31 May, 2026

  F6 E7 means a Microwave Appliance Manager or wiring fault in your KitchenAid combo unit. Reset the breaker first to clear it.

• KitchenAid F6 E5 Error Code - Causes & Fix

  31 May, 2026

  F6 E5 means a control panel or wiring fault. Power reset first, then check connectors and replace the panel or board if needed.

• KitchenAid F6 E4 Error Code - Causes & Fix

  31 May, 2026

  F6 E4 means a control board or wiring fault in your KitchenAid oven. Most likely fix: power reset at the breaker for one minute.

• KitchenAid Oven F6 E3 Error - Causes & Fix

  31 May, 2026

  F6 E3 on a KitchenAid oven signals a control/communication fault. Power-cycle the oven first, then check wiring and controls.

• KitchenAid Oven F6 E2 - Causes & Fix

  31 May, 2026

  F6 E2 means a fault in the Appliance Manager Control, Converter Control, or wiring. Power-cycle the breaker for one minute first.

• KitchenAid Oven F6 E1 Error Code - Causes & Fix

  31 May, 2026

  F6 E1 is a control communication fault. Most often caused by a failed temperature sensor or loose wiring. Sensor replacement fixes most cases.

• KitchenAid F6 E0 Error Code - Causes & Fix

  31 May, 2026

  F6 E0 means the control board cannot communicate with the user interface. Reset the circuit breaker for 1 minute to clear the fault.

• KitchenAid Oven PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure or first power-up on KitchenAid ovens. Press Cancel to clear, reset the clock, and check for loose power connections.

• KitchenAid Oven SAB Error Code - Causes & Fix

  31 May, 2026

  SAB on a KitchenAid oven means Sabbath Mode is active, not a fault. Exit the mode using your model's control sequence to restore normal operation.

• KitchenAid Oven LOC Error Code - Causes & Fix

  31 May, 2026

  LOC means Control Lock is on. Press and hold START/ENTER for 5 seconds to unlock. No error, just a user-activated safety feature.

• KitchenAid CAL Error Code - Causes & Fix

  31 May, 2026

  CAL is not an error. It means the oven is in calibration mode. Exit the mode by pressing Cancel or adjust the temperature offset if needed.

• Frigidaire F94 Error Code - Causes & Fix

  31 May, 2026

  F94 means a door lock problem on your Frigidaire oven. Reset power and press UNLOCK. If it persists, replace the lock assembly.

• Frigidaire Oven F93 Error Code - Causes & Fix

  31 May, 2026

  F93 means the door lock timed out or failed to latch. Most often the door lock motor or latch assembly has failed and needs replacement.

• Frigidaire Oven F41 Error Code - Causes & Fix

  31 May, 2026

  F41 means cooktop lockout is active or a control fault. Try a 30-second power reset and cancel lock by holding OFF for 6 seconds.

• Frigidaire Oven F92 Error Code - Causes & Fix

  31 May, 2026

  F92 means a door lock problem on your Frigidaire oven. Reset power first. If it returns, the door lock assembly usually needs replacement.

• Frigidaire Oven F40 Error Code - Causes & Fix

  31 May, 2026

  F40 means your cooktop is locked out. Power-cycle the range for 30 seconds to reset the lockout and clear the code.

• Frigidaire F13 Error Code - Causes & Fix

  31 May, 2026

  F13 means EEPROM failure on the control board. Power-cycle the range for 30 seconds first. If it returns, replace the control board.

• Frigidaire F20 Error Code - Causes & Fix

  31 May, 2026

  F20 means a communication error between control boards. Power-reset the range for 30 seconds; if it returns, check harness connections.

• Frigidaire F26 Error Code - Causes & Fix

  31 May, 2026

  F26 means a communication error between control boards. Most often fixed by cycling power or replacing a failed control board or harness.

• Frigidaire Oven F12 Error Code - Causes & Fix

  31 May, 2026

  F12 means Micro Identification on Frigidaire ovens. A 30-second power reset fixes most cases. If it returns, replace the user interface.

• Frigidaire Oven F3 Error - Causes & Fix

  31 May, 2026

  F3 on a Frigidaire oven means a temperature sensor circuit fault or communication error. Most often the oven sensor has failed.

• GE Oven F97 Error Code - Causes & Fix

  31 May, 2026

  F97 means an internal component failed, usually the lower cooling fan or its sensor. Most techs replace the fan assembly first.

• GE Oven FF Error Code - Causes & Fix

  31 May, 2026

  FF means invalid temperature reading from the sensor circuit. Most often fixed by replacing the oven temperature sensor or its harness.