Tag: oven

All the articles with the tag "oven".

• Bosch Oven F41 Error Code - Causes & Fix

  31 May, 2026

  F41 means a faulty door latch motor or wiring. Most likely fix: check for jammed latch mechanism, loose wiring, or replace the latch motor.

• Bosch Oven F31 Error Code - Causes & Fix

  31 May, 2026

  F31 means the oven detected a faulty temperature sensor circuit. Most common fix: replace the oven temperature sensor probe or repair damaged wiring.

• Bosch Oven ER3 Error Code - Causes & Fix

  31 May, 2026

  ER3 means your Bosch oven has overheated. Let it cool completely, check the cooling fan runs, and clear any blocked vents.

• Bosch Oven Er1 Error Code - Causes & Fix

  31 May, 2026

  Er1 on a Bosch oven means temperature sensor failure. Most likely fix: replace the oven temperature sensor after testing it.

• Bosch Oven E8401 Error Code - Causes & Fix

  31 May, 2026

  E8401 indicates a temperature-sensing or overtemp fault, often a bad NTC sensor or heating element ground leak. Replace the probe first.

• Bosch Oven E6200 Error Code - Causes & Fix

  31 May, 2026

  E6200 on a Bosch oven means the cooling or circulation fan is faulty or stalled. The most common fix is replacing the fan motor.

• Bosch Oven E115 Error Code - Causes & Fix

  31 May, 2026

  E115 means your Bosch oven has overheated. Most common fix: check the temperature sensor and cooling fan for failure.

• Maytag Oven PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure was detected. Press Cancel to clear the code, then reset the clock if needed and check for normal operation.

• Maytag Oven A6 Error Code - Causes & Fix

  31 May, 2026

  A6 or SAb on your Maytag oven means Sabbath mode is active. Exit the mode by holding the clock or cancel key for several seconds.

• Maytag Oven AB Error Code - Causes & Fix

  31 May, 2026

  AB (SAb) on a Maytag oven means Sabbath mode is active, not a fault. Exit by pressing and holding Clock for 3+ seconds.

• Maytag Oven CAL Error Code - Causes & Fix

  31 May, 2026

  CAL on a Maytag oven means the calibration feature is active, not a fault. Exit calibration mode or adjust the temperature offset.

• Maytag Oven Lock Error Code - Causes & Fix

  31 May, 2026

  Lock or LOC means Control Lock is on; hold START/ENTER 5 seconds to unlock. F9-1 to F9-6 codes signal a door latch fault.

• Maytag Oven SAB Error Code - Causes & Fix

  31 May, 2026

  SAB on your Maytag oven means Sabbath Mode is active, not a failure. Exit it by holding the Clock button for 3 seconds on most models.

• Maytag Oven LOC Error Code - Causes & Fix

  31 May, 2026

  LOC means Control Lock is active, not a failure. Press and hold START/ENTER for 5 seconds to unlock the keypad and clear the message.

• Maytag Oven F8 Error Code - Causes & Fix

  31 May, 2026

  F8 on a Maytag oven means an analog/digital board fault or meat probe issue. Most often fixed by replacing the control board (ERC).

• Maytag Oven F7 Error Code - Causes & Fix

  31 May, 2026

  F7 means a stuck or shorted keypad button or an electronic control fault. Most often fixed by replacing the touchpad or control board.

• Maytag Oven F3 Error Code - Causes & Fix

  31 May, 2026

  F3 on a Maytag oven means a temperature sensor circuit fault. The sensor probe is the most common fix, followed by wiring or the control board.

• Maytag Oven F4 Error Code - Causes & Fix

  31 May, 2026

  F4 signals a temperature sensor circuit fault. Most often the oven sensor has shorted. Reset power first, then check the sensor.

• Maytag Oven F2 Error Code - Causes & Fix

  31 May, 2026

  F2 means over-temperature condition or sensor fault. F2 E0 points to keypad or control wiring. Most common fix: replace temperature sensor.

• Maytag Oven F1 Error Code - Causes & Fix

  31 May, 2026

  F1 signals a fault in the oven temperature sensor or control circuit. Most often fixed by replacing the temperature sensor or checking wiring.

• Maytag Oven F0 Error Code - Causes & Fix

  31 May, 2026

  F0 means the control can't identify the fault, usually a stuck keypad. Reset power for 1 minute. If it returns, replace the touchpad.

• KitchenAid Oven F9 Error Code - Causes & Fix

  31 May, 2026

  F9 or F9 E0 means miswired electrical supply or incorrect voltage detected. Check terminal block connections and verify L2 and N wiring.

• KitchenAid F6 EA Error Code - Causes & Fix

  31 May, 2026

  F6 EA means the control senses over-temperature or a wiring fault. Reset power for 1 minute, then check wiring and connectors.

• KitchenAid F6 E8 Error - Causes & Fix

  31 May, 2026

  F6 E8 means lost communication with the microwave control board. Reset the breaker for 1 minute to clear the fault and restore operation.