Tag: dishwasher

All the articles with the tag "dishwasher".

• KitchenAid Dishwasher F6E4 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E4 means the overfill float switch is open or stuck. The common fix is freeing the float or replacing the float switch.

• KitchenAid Dishwasher F7E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F7E1 means the heating element is not heating the water. The common fix is testing and replacing the heating element.

• KitchenAid Dishwasher F8E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F8E1 means a slow drain. Clear the drain path and filter first, then test or replace the drain pump if water still lingers.

• KitchenAid Dishwasher F9E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F9E1 means the control cannot detect the diverter disc position. The common fix is the diverter motor and disc assembly.

• LG Dishwasher CE Error Code - Causes & Fix

  30 May, 2026

  CE on an LG dishwasher is a motor or communication fault between the main and sub boards. Power cycle first, then check wiring and the control board.

• LG Dishwasher E1 Error Code - Causes & Fix

  30 May, 2026

  E1 means your LG dishwasher detected a leak and the float switch tripped. Dry the base, fix the leak, then replace the float switch assembly.

• LG Dishwasher FE Error Code - Causes & Fix

  30 May, 2026

  FE means your LG dishwasher detected too much water and is overfilling. Shut the supply off, check for suds, then replace a stuck water inlet valve.

• LG Dishwasher HE Error Code - Causes & Fix

  30 May, 2026

  HE means your LG dishwasher cannot heat the water properly. Power cycle first, then test the heating element and replace it if it has no continuity.

• LG Dishwasher LE Error Code - Causes & Fix

  30 May, 2026

  LE is a locked motor error on your LG dishwasher. Clear debris from the wash impeller and check wiring, then replace the circulation pump motor.

• LG Dishwasher nE Error Code - Causes & Fix

  30 May, 2026

  nE points to the Vario diverter motor on your LG dishwasher. Power cycle and check wiring, then test the motor resistance and replace it if off.

• Samsung Dishwasher 3C Error Code - Causes & Fix

  30 May, 2026

  3C means the wash circulation pump is not running right. Check for a jammed impeller and debris first, then test the pump motor.

• Samsung Dishwasher 3E Error Code - Causes & Fix

  30 May, 2026

  3E means the incoming water is too hot. Lower the water heater feed or check the temperature sensor that reads the inlet.

• Samsung Dishwasher 4C Error Code - Causes & Fix

  30 May, 2026

  4C means the dishwasher cannot fill with enough water in time. Most fixes start by opening the supply valve and cleaning the inlet screen.

• Samsung Dishwasher 5C Error Code - Causes & Fix

  30 May, 2026

  5C means the dishwasher cannot drain the water out. Most fixes start with cleaning the filter and clearing the drain pump and hose.

• Samsung Dishwasher 9E Error Code - Causes & Fix

  30 May, 2026

  9E means the dishwasher detects a low water level during the wash. Check the supply and inlet valve, then the float switch.

• Samsung Dishwasher bE Error Code - Causes & Fix

  30 May, 2026

  bE means a button is stuck on the control panel. Clean the buttons first, then replace the panel or membrane if one stays pressed.

• Samsung Dishwasher HC Error Code - Causes & Fix

  30 May, 2026

  HC means the dishwasher detected overheating at the heater. The common cause is a stuck heating element relay or a failing thermistor.

• Samsung Dishwasher LC Error Code - Causes & Fix

  30 May, 2026

  LC means the leak sensor in the base pan found moisture. Most fixes start by drying the pan and finding the drip source.

• Samsung Dishwasher OC Error Code - Causes & Fix

  30 May, 2026

  OC means the dishwasher detected too much water in the tub. Stop the cycle and check for a stuck inlet valve or a drain problem.

• Samsung Dishwasher tC Error Code - Causes & Fix

  30 May, 2026

  tC means the temperature sensor signal is out of range. Check the thermistor wiring first, then test and replace the sensor.

• Whirlpool Dishwasher F2E2 Error Code - Causes & Fix

  30 May, 2026

  F2E2 means the main board lost communication with the user interface. The most likely fix is reseating connectors or replacing the interface board.

• Whirlpool Dishwasher F3E1 Error Code - Causes & Fix

  30 May, 2026

  F3E1 means the thermistor or optical water sensor signal is out of range. The most likely fix is replacing the OWI temperature sensor.

• Whirlpool Dishwasher F5E1 Error Code - Causes & Fix

  30 May, 2026

  F5E1 means the control sees a door switch fault. The most likely fix is replacing a worn door latch assembly so the door reads as closed.

• Whirlpool Dishwasher F6E1 Error Code - Causes & Fix

  30 May, 2026

  F6E1 means the dishwasher is not filling with water. The most likely fix is replacing a failed water inlet valve or clearing a kinked supply line.