Tag: dishwasher

All the articles with the tag "dishwasher".

• Bosch Dishwasher E08 Error Code - Causes & Fix

  30 May, 2026

  E08 means water level is too low or not pumping correctly. Most often fixed by cleaning the filter or checking inlet water supply.

• Bosch E07 Error Code - Causes & Fix

  30 May, 2026

  E07 means a Zeolite CrystalDry fan fault. Most often caused by water leaking into the drying assembly from a cracked fill tube.

• Bosch Dishwasher E06 Error Code - Causes & Fix

  30 May, 2026

  E06 means a door sensor circuit fault. Most often the door isn't latching fully or the door sensor has failed. Try a power reset first.

• Bosch Dishwasher E04 Error - Causes & Fix

  30 May, 2026

  E04 means faulty heater electronics or wash-arm diverter circuit. Most common fix: reset power, clean filters and spray arms.

• Bosch Dishwasher E02 Error - Causes & Fix

  30 May, 2026

  E02 is a main control board relay fault on Bosch dishwashers. Reset power at the breaker for 30 seconds first.

• Bosch Dishwasher E03 Error Code - Causes & Fix

  30 May, 2026

  E03 means the dishwasher did not fill with water in time. Check the supply valve and inlet screen, then test the water inlet valve.

• Bosch Dishwasher E13 Error Code - Causes & Fix

  30 May, 2026

  E13 means the incoming water is too hot. Confirm the dishwasher is plumbed to a cold line, then check the water temperature sensor.

• Bosch Dishwasher E14 Error Code - Causes & Fix

  30 May, 2026

  E14 means the flow meter is not reporting water moving in. Clean the inlet screen, then suspect the reed switch flow sensor.

• Bosch Dishwasher E17 Error Code - Causes & Fix

  30 May, 2026

  E17 means the dishwasher overfilled with water. Shut the supply, free the float, and check for an inlet valve stuck open.

• Bosch Dishwasher E18 Error Code - Causes & Fix

  30 May, 2026

  E18 means the dishwasher is not getting enough water. Check the supply valve and inlet screen, then test the inlet valve.

• Bosch Dishwasher E25 Error Code - Causes & Fix

  30 May, 2026

  E25 means the drain pump is blocked or its cover is loose. Clear the impeller, reseat the cover, and check the non-return valve.

• GE Dishwasher C1 Error Code - Causes & Fix

  30 May, 2026

  C1 means the drain was partly blocked and pump out ran too long. Most often a clogged filter, air gap, or kinked drain hose.

• GE Dishwasher C3 Error Code - Causes & Fix

  30 May, 2026

  C3 means the dishwasher will not drain and water stays in the tub. Most often a clogged filter or a drain pump jammed by debris or glass.

• GE Dishwasher C4 Error Code - Causes & Fix

  30 May, 2026

  C4 means an overfill was sensed after a power failure. Most often a stuck float switch, or a water inlet valve that will not close.

• GE Dishwasher C5 Error Code - Causes & Fix

  30 May, 2026

  C5 means the dishwasher underfilled or pumped out too fast. Most often a low water supply or a clogged water inlet valve.

• GE Dishwasher C6 Error Code - Causes & Fix

  30 May, 2026

  C6 means the wash water never reached the target temperature. Most often a cool incoming supply or a failed dishwasher heating element.

• GE Dishwasher C7 Error Code - Causes & Fix

  30 May, 2026

  C7 means the water temperature sensor circuit failed open or shorted. Most often a bad thermistor or a loose sensor wiring connection.

• GE Dishwasher C8 Error Code - Causes & Fix

  30 May, 2026

  C8 means the detergent cup cannot open fully during the cycle. Most often debris around the cup or a failed dispenser actuator.

• GE Dishwasher FTD Error Code - Causes & Fix

  30 May, 2026

  FTD means the dishwasher failed to drain on time. Most often a gunked up filter or a drain pump jammed by food debris or glass.

• KitchenAid Dishwasher F2E2 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F2E2 means the user interface cannot talk to the control board. Reseat the ribbon and harness, then replace the failed board.

• KitchenAid Dishwasher F3E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F3E1 points to a thermistor or OWI sensor failure. Clean the sensor first, then replace the thermistor and OWI if it stays.

• KitchenAid Dishwasher F5E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F5E1 means the control does not see the door latched. The common fix is the door latch and switch assembly or its wiring.

• KitchenAid Dishwasher F6E2 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E2 flags a water inlet valve failure. The fix is usually a clogged inlet screen, a wiring fault, or a new inlet valve.

• KitchenAid Dishwasher F6E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E1 means the dishwasher did not fill with enough water in time. Most fixes start at the water inlet valve and its inlet screen.