Tag: appliance
All the articles with the tag "appliance".
-
Samsung Microwave C-22 Error - Causes & Fix
C-22 means temperature sensor fault (open or shorted thermistor). Most often fixed by replacing the cavity temperature sensor.
-
Samsung C-20 Error Code - Causes & Fix
C-20 means the oven temperature sensor is shorted or open. Replace the sensor (most common fix) or check its wiring and connectors.
-
Samsung Microwave C-12 Error Code - Causes & Fix
C-12 means a gas/easy/PH sensor fault. Most often a temporary glitch fixed by unplugging for 60 seconds, or a failed sensor assembly.
-
Samsung Dryer tCS Error Code - Causes & Fix
tCS means temperature sensor or overheating fault. Clean the lint screen and exhaust duct; check the thermistor for damage or loose wires.
-
Samsung Dryer tC5 Error Code - Causes & Fix
tC5 means temperature sensor or overheating fault. Most often a blocked vent or lint buildup. Clean the vent and test the thermistor.
-
Samsung Dryer tC Error Code - Causes & Fix
Samsung tC error means a temperature-sensing or overheat fault. Most often caused by blocked venting. Clean lint screen and check duct.
-
Samsung Dryer HC Error Code - Causes & Fix
HC means your Samsung dryer is overheating. Most often it's a clogged lint screen or blocked vent. Clean both and check the exhaust path.
-
Samsung Dryer FE Error Code - Causes & Fix
FE means incorrect power-source frequency detected. Usually a loose cord connection or unstable utility power, not a dryer fault.
-
Samsung Dryer EEE Error Code - Causes & Fix
EEE means internal boards can't communicate. Power off for 60 seconds first. If the code returns, a board or harness has failed.
-
Samsung Dryer DN Error Code - Causes & Fix
DN means a firmware download is in progress on smart Samsung dryers. Leave it powered on, wait 24 hours, then call service if it persists.
-
Samsung Dryer CT Error Code - Causes & Fix
CT means restricted airflow during the vent-blockage test. Clean the lint filter, check the exhaust hose, and clear any duct blockage.
-
Samsung Dryer bC2 Error Code - Causes & Fix
bC2 means a stuck or continuously pressed button on the control panel. Most often a physically jammed button or moisture on the keypad.
-
Samsung Washer bC Error Code - Causes & Fix
bC means a stuck or continuously pressed button on the control panel. Most often fixed by cleaning buttons or replacing the display PCB.
-
Samsung Washer AE Error Code - Causes & Fix
AE means communication error or water leak detected. Check for leaks around door, hoses, and cabinet, then inspect wiring to inverter board.
-
Samsung Refrigerator AP Code - Causes & Fix
AP means Access Point mode for Wi-Fi setup, not an error. Exit by holding the model-specific button (often Freezer or Ice Off) 3-5 seconds.
-
Samsung Refrigerator 88 Error Code - Causes & Fix
88 or 88 88 means a communication fault or startup anomaly on Family Hub models. Power-cycle the unit for 60 seconds to clear the code.
-
Samsung 33E Error Code - Causes & Fix
Samsung 33E means the ice maker fill tube heater has failed or lost connection. Replace the ice pipe heater assembly or fix wiring.
-
Samsung Refrigerator 1E Error Code - Causes & Fix
1E means freezer sensor fault or power-interruption alert (varies by model). Most often fixed by resetting or replacing the sensor.
-
Samsung Range SE Error Code - Causes & Fix
SE means a stuck or shorted key on the touchpad. Most likely fix: replace the membrane switch assembly after resetting power.
-
Samsung C-d0 Error Code - Causes & Fix
C-d0 means a button problem on Samsung ovens/microwaves. Clean and dry the keypad, turn off power for 30 seconds, and restart.
-
Samsung C-21 Error Code - Causes & Fix
C-21 means the oven detected overheating and shut down. Most often a failed temperature sensor. Cool the unit, test the sensor, check airflow.
-
Samsung Oven E28 Error Code - Causes & Fix
E28 means a shorted oven temperature sensor. The most common fix is replacing the thermistor, which typically reads under 930 Ω.
-
Samsung Oven E-28 Error Code - Causes & Fix
E-28 means a shorted or out-of-range temperature sensor circuit. The most common fix is replacing the oven temperature sensor.
-
Samsung Oven C-22 Error Code - Causes & Fix
C-22 means sensor malfunction on Samsung ovens. Turn off and restart, then disconnect power for 30+ seconds if the code persists.