Tag: appliance
All the articles with the tag "appliance".
-
Samsung Oven E27 Error Code - Causes & Fix
E27 on a Samsung oven means the temperature sensor circuit is open or out of range. Most often a failed sensor or loose wiring.
-
Samsung Oven E-27 Error Code - Causes & Fix
E-27 means the oven temperature sensor circuit is open or faulty. The most common fix is replacing the oven temperature sensor.
-
Samsung Dryer tE1 Error Code - Causes & Fix
tE1 means a temperature sensor fault. Most common fix: replace the thermistor or clean the connector. Check airflow and vent first.
-
Whirlpool Dryer F01 Error Code - Causes & Fix
F01 signals a control board or electronic fault. Most often caused by failed solder joints or a bad relay on the main control board.
-
Samsung C-F0 Oven Error - Causes & Fix
C-F0 means internal communication error between control boards. On select induction models, update firmware via SmartThings first.
-
Samsung Oven C-d0 Error Code - Causes & Fix
C-d0 means a stuck or moisture-contaminated button on your Samsung oven. Clean and dry the control panel, then power-cycle the unit.
-
Samsung Oven C-24 Error Code - Causes & Fix
C-24 means your Samsung oven is heating faster than normal. The most common fix is clearing the blocked vent at the back of the range.
-
Samsung Oven C-23 Error Code - Causes & Fix
C-23 means the oven temperature probe sensor circuit is shorted. Most often the probe itself has failed and needs replacement.
-
Samsung Microwave E-X1 Error - Causes & Fix
E-X1 means additional open error (open circuit detected). Unplug for 60 seconds. If it returns, call service-usually wiring or sensor.
-
Samsung Microwave E-83 Error Code - Causes & Fix
E-83 means the main board cannot communicate with the display board. Most often fixed by a power reset or replacing the control board.
-
Samsung Microwave E-54 Error - Causes & Fix
E-54 is Samsung's Zero error code, usually a temporary electronic fault. Unplug for 60 seconds to reset. If it returns, call service.
-
Samsung E-52 Error Code - Causes & Fix
E-52 means EEPROM short in microwaves or PCB/Wi-Fi fault (52E/52C) in refrigerators. Reset power for 60 seconds; if it returns, call service.
-
Samsung Microwave E-46 Error - Causes & Fix
E-46 means Primary Open Error: the door interlock circuit is open. Most often caused by a failed primary door switch or latch issue.
-
Samsung Microwave E-41 Error - Causes & Fix
E-41 means Open Easy/PH Sensor Error on consumer Samsung microwaves. Unplug 60 seconds, let dry if steam present, and call service if it returns.
-
Samsung Microwave E-34 Error - Causes & Fix
E-34 means Over Weight Error on Samsung microwaves. Most often the food load exceeds the auto-cook limit. Unplug 60 sec and retry.
-
Samsung Microwave E-26 Error - Causes & Fix
E-26 means Temperature Not Over AD Error on Samsung microwaves. Unplug for 60 seconds. If it returns, call service for sensor or board repair.
-
Samsung Microwave E-24 Error - Causes & Fix
E-24 means over-temperature error on Samsung microwaves. Usually caused by blocked vents or residual heat. Unplug 60 seconds, cool, clear vents.
-
Samsung E-23 Microwave Error - Causes & Fix
E-23 on Samsung microwaves means T1 Max Time Error, a temperature-sensing fault. Power reset first, call service if it returns.
-
Samsung E-13 Error Code - Causes & Fix
E-13 on Samsung refrigerators means humidity sensor error. Most often fixed by replacing the humidity sensor or reseating its connector.
-
Samsung Microwave E-02 Error - Causes & Fix
E-02 means a cooking time setting exceeded the microwave's allowed range. Power-cycle the unit for 60 seconds to reset the controller.
-
Samsung Microwave C-F1 Error - Causes & Fix
C-F1 means an EEPROM read/write communication error in the control system. Most often caused by a failed main control board PCB.
-
Samsung Microwave C-A0 Error Code - Causes & Fix
C-A0 is a functional error on Samsung microwaves. Most often caused by moisture in the control area. Unplug, dry, wait 60 seconds, retry.
-
Samsung Microwave C-72 Error - Causes & Fix
C-72 means steam sensor error. Unplug 60 seconds, let dry if wet, restart. If code returns call service for sensor or board repair.
-
Samsung C-71 Error Code - Causes & Fix
C-71 on Samsung microwaves means a steam sensor or humidity fault. Most often caused by moisture intrusion or a loose steam-generator wire.