Tag: appliance

All the articles with the tag "appliance".

• Whirlpool Oven A6 Error Code - Causes & Fix

  8 Jun, 2026

  A6 is not a standard Whirlpool oven error code. Reset power at the breaker for 1 minute. If it returns, check keypad connections.

• Whirlpool F6E2 Error Code - Causes & Fix

  8 Jun, 2026

  F6E2 signals a control-board or user-interface communication fault. Power reset for 5 minutes clears it most often. Not a dishwasher code.

• LG Washer E21 Error Code - Causes & Fix

  8 Jun, 2026

  E21 may indicate a drain fault on some LG washer models. Clean the drain filter and check the hose for kinks or clogs to restore proper drainage.

• Whirlpool F3 Error Code - Causes & Fix

  8 Jun, 2026

  F3 means an oven temperature sensor circuit fault. Most often the sensor probe has failed and needs replacement.

• Whirlpool Range F2 Error Code - Causes & Fix

  8 Jun, 2026

  F2 or F2 E1 on Whirlpool ranges signals a keypad or control-board fault. Most often a stuck touchpad or bad UI board.

• Whirlpool Range F1 Error Code - Causes & Fix

  8 Jun, 2026

  F1 on a Whirlpool range means a control or sensor fault. Most often the electronic control board has failed and needs replacement.

• Whirlpool Range F0 Error Code - Causes & Fix

  8 Jun, 2026

  F0 means the electronic oven control cannot recognize the fault. Most likely fix: reset power for 1 minute, then replace control board.

• Whirlpool Range AB Error Code - Causes & Fix

  8 Jun, 2026

  AB is not a standard Whirlpool range error code. Likely a misread display or model-specific fault. Power-cycle the unit first.

• Whirlpool Range A6 Error Code - Causes & Fix

  8 Jun, 2026

  A6 is not a standard Whirlpool range code. The closest documented code is F7 E6, which signals a cooling fan or wiring problem.

• Whirlpool SAB Error Code - Causes & Fix

  8 Jun, 2026

  SAB on Whirlpool ovens means Sabbath Mode is activated, not a fault. Exit using your model's settings menu or power-cycle the breaker.

• Whirlpool Oven PF Error Code - Causes & Fix

  8 Jun, 2026

  PF means Power Failure: the control detected a power interruption. Press Cancel to clear it, then reset the clock if needed.

• Whirlpool Oven Lock Error Code - Causes & Fix

  8 Jun, 2026

  LOC means control lock is active. Press and hold START for 5 seconds to unlock. F9/F9-E0 signals power supply or door lock failure.

• Whirlpool Oven LOC Error Code - Causes & Fix

  8 Jun, 2026

  LOC means the control lock (child lock) is enabled on your Whirlpool oven. Press and hold START/ENTER for 5 seconds to unlock the keypad.

• Whirlpool Oven F9 Error Code - Causes & Fix

  8 Jun, 2026

  F9 or F9 E0 means miswired outlet or incorrect voltage detected at startup. Reset power at the breaker for 1 minute first.

• Whirlpool Oven F7 Error Code - Causes & Fix

  8 Jun, 2026

  F7 on Whirlpool ovens means door latch failure (F7 E0 on ranges) or control board fault (F7 on microwaves). Check wiring first.

• Whirlpool Oven F5 E1 Error - Causes & Fix

  8 Jun, 2026

  F5 E1 means a door latch or door lock circuit fault. Most often the latch motor has failed or the control board cannot read the latch.

• Whirlpool Oven F5 E0 Error Code - Causes & Fix

  8 Jun, 2026

  F5 E0 signals a door-latch or door-switch circuit fault. Most often a failed door switch or stuck latch assembly causes the error.

• Whirlpool Oven F3 E1 Error Code - Causes & Fix

  8 Jun, 2026

  F3 E1 means a fault in the oven temperature sensor circuit. The most common fix is replacing the failed oven temperature sensor.

• Whirlpool Oven F3 E0 Error - Causes & Fix

  8 Jun, 2026

  F3 E0 means a fault in the oven temperature sensor circuit. The most common fix is replacing the oven temperature sensor itself.

• Whirlpool Oven F2 E1 Error - Causes & Fix

  8 Jun, 2026

  F2 E1 means a keypad or control communication fault. Most often a stuck key or loose ribbon cable between touchpad and board.

• Whirlpool Oven F1 E1 Error - Causes & Fix

  8 Jun, 2026

  F1 E1 means control board EEPROM checksum error. Power-cycle the oven at the breaker first. If code returns, replace control board.

• Whirlpool Oven F1 E0 Error Code - Causes & Fix

  8 Jun, 2026

  F1 E0 signals a control-system fault in the oven control or wiring. Most often a failed control board or touch panel needs replacement.

• Whirlpool Oven AB Error Code - Causes & Fix

  8 Jun, 2026

  AB on a Whirlpool oven usually means Sabbath Mode (SAb/5AB/5A6) is active, not a fault. Exit the mode via your control panel.

• Whirlpool Microwave F7 Error - Causes & Fix

  8 Jun, 2026

  F7 means the microwave could not execute a function due to a control-board or wiring problem. Reset power at the breaker for 1 minute.