Skip to content
Industrial Error Code Fixes
Go back

Rheem RPH Series Packaged Unit Error Codes: Complete Guide

⚡ Quick Answer

Rheem RPH packaged heat pump error codes and fault diagnostics. Flash codes, fault descriptions, and step-by-step technician fixes.

Rheem RPH Series Packaged Unit Error Codes

Rheem RPH packaged heat pump units use an LED diagnostic indicator on the control board. Flash sequences indicate specific faults ΓÇö count flashes between 3-second pauses. Units with the EcoNet communicating system display alphanumeric codes on the thermostat.

RPH Flash Code Table

FlashesFault DescriptionCommon CauseAction
2Low-pressure lockoutLow charge or frozen coilCheck refrigerant charge
3High-pressure lockoutDirty coil or failed fanWash condenser coil
4Open high-pressure switchOvercharge or condenser blockageCheck subcooling
5Open low-pressure switchLow refrigerant, TXV issueInspect TXV and charge level
6Outdoor fan motor faultFailed motor or run capacitorCheck capacitor and motor amps
7Defrost faultDefrost sensor or board failureCheck sensor clip and board
8Reversing valve stuckMechanical or solenoid failureCheck 24 VAC to solenoid
9Control board failureInternal failureReplace control board
Steady ONNormal operation or continuityNo active faultN/A

Most Common RPH Faults

3 Flashes ΓÇö High-Pressure Lockout

Most common summer service call on packaged units. Verify condenser fan rotation (should pull air up through the coil). Wash coil with commercial coil cleaner. Check for restricted condenser fan discharge.

2 Flashes ΓÇö Low Pressure

In cooling mode: check refrigerant charge using subcooling method. In heating mode: ice on outdoor coil triggers LP trip ΓÇö verify defrost system operation.

7 Flashes ΓÇö Defrost Fault

Confirm defrost thermostat is clipped firmly to the liquid line near the outdoor coil. Check defrost board timing pins ΓÇö jumper JP1 sets cycle time. Verify defrost terminates within 14 minutes.

8 Flashes ΓÇö Reversing Valve

Rheem RPH reversing valves are energized in cooling. If stuck in one position, you’ll have cooling-only or heating-only operation. Measure solenoid coil resistance (typically 18ΓÇô30 ╬⌐).

Parts Commonly Needed

PartNotes
Defrost boardAmazon | Critical ΓÇö match to exact model
Defrost thermostatAmazon | Available in multiple trip temperatures
Run capacitorAmazon | Dual-run ΓÇö test both sections
Reversing valveAmazon | Match tonnage and refrigerant type
ContactorAmazon | Check for pitting and coil voltage
Control boardAmazon | Match unit serial and model number

Pro tip: Rheem RPH units with EcoNet log fault history with timestamps. Connect EcoNet app to retrieve detailed fault history before servicing ΓÇö saves significant diagnostic time.


🔧 Need a professional? Get free quotes from certified HVAC contractors near you.
Get Free Quotes →
Share this post on:

Previous Post
Quincy QGS Compressor Fault Codes: Complete Guide
Next Post
Rinnai I120CN Tankless Water Heater Error Codes: Complete Guide