Posts
All the articles I've posted.
-
Frigidaire Dishwasher Leaking - Causes & Fix
Water in the leak pan triggers the i30 fault. Most often caused by oversudsing, a loose hose, or a door seal issue.
-
Frigidaire Dishwasher Not Drying - Causes & Fix
Most often caused by wrong cycle selection (Quick Wash or Air Dry), empty rinse aid dispenser, or low water heater temperature below 120°F.
-
Frigidaire Dishwasher Not Cleaning Dishes - Causes & Fix
A clogged filter or sump is the most common cause. Clean the filter system, glass trap, and sump area to restore circulation.
-
Frigidaire Dishwasher Not Draining - Causes & Fix
A Frigidaire dishwasher that won't drain usually has a clogged filter, blocked drain hose, or forgotten disposer knockout plug blocking the path.
-
GE Dishwasher Smells Bad - Causes & Fix
Usually caused by food debris and grease buildup in the filter or drain area. Clean the filter, sump, and spray arms thoroughly.
-
GE Dishwasher Stuck Mid Cycle - Causes & Fix
Usually a water-level sensor or inlet valve problem stopping the control from advancing. Check fill performance and sensor first.
-
GE Dishwasher Won't Fill With Water - Causes & Fix
Usually a stuck flood float or a clogged inlet valve. Check the float under the tub for obstructions, then test water supply and valve.
-
GE Dishwasher Won't Start - Causes & Fix
A GE dishwasher that won't start usually means the door latch or switch isn't registering closed. Check the door closure and latch first.
-
GE Dishwasher Leaking - Causes & Fix
Water in the base pan or a leak sensor trigger stops the cycle. Most often caused by a worn door seal, loose hose, or pump seal leak.
-
GE Dishwasher Not Drying - Causes & Fix
Most often caused by a disabled heated dry option, empty rinse aid, or a failed heating element. Check settings and load first, then test the heater circuit.
-
GE Dishwasher Not Draining - Causes & Fix
Usually caused by a kinked drain hose or clogged filter. Clear the hose under the sink and clean the sump filters to restore drainage.
-
KitchenAid Dishwasher Smells Bad - Causes & Fix
Usually trapped food debris in the filter or stagnant water in the drain. Clean the filter, spray arms, and door seals monthly.
-
KitchenAid Dishwasher Stuck Mid Cycle - Causes & Fix
Most often caused by a door latch not closing properly or power interruption. Reset by unplugging for 30 seconds, then check door and latches.
-
KitchenAid Dishwasher Won't Fill With Water - Causes & Fix
Usually a closed water supply valve or a door not fully latched. Check the shutoff under the sink and confirm the door clicks closed.
-
KitchenAid Dishwasher Won't Start - Causes & Fix
Control lock is usually on. Press and hold the lock button for four seconds to disable it, then press START/RESUME to begin a cycle.
-
KitchenAid Dishwasher Not Drying - Causes & Fix
Usually caused by no Heat Dry option selected or missing rinse aid. Verify drying option is on, add rinse aid, and run Sanitize test.
-
KitchenAid Dishwasher Leaking - Causes & Fix
A damaged or dirty door gasket is the most common cause. Clean the gasket thoroughly and inspect for tears or flattening.
-
KitchenAid Dishwasher Not Cleaning Dishes - Causes & Fix
Usually caused by a clogged filter or spray arms. Clean the filter first, then check spray nozzles and loading patterns.
-
KitchenAid Dishwasher Not Draining - Causes & Fix
Clogged filter or sump screen is usually blocking flow. Clear the filter, check the drain hose for kinks, and test the drain pump.
-
Whirlpool Dishwasher Smells Bad - Causes & Fix
A dirty or clogged filter is the most common cause. Remove and wash the filter in warm soapy water, then run a vinegar cleaning cycle.
-
Whirlpool Dishwasher Stuck Mid-Cycle - Causes & Fix
A dishwasher stopping mid-cycle is usually a door-latch fault, power interruption, or control-lock setting. Reset power for 30 seconds and check the latch.
-
Whirlpool Dishwasher Won't Fill With Water - Causes & Fix
Usually a closed supply valve, kinked hose, clogged inlet valve, or stuck float. Check water supply first, then valve and float.
-
Whirlpool Dishwasher Not Drying - Causes & Fix
Usually caused by missing rinse aid or no Heat Dry option selected. Check rinse aid level, select Heat Dry, and test element.
-
Whirlpool Dishwasher Won't Start - Causes & Fix
Control lock or delay wash is usually active. Disable control lock, cancel any delay, verify the door latches fully, then reset power.