Tag: whirlpool

All the articles with the tag "whirlpool".

• Whirlpool Microwave E21 Error - Causes & Fix

  31 May, 2026

  E21 means the control board sees an open thermal sensor circuit. Most often caused by a failed sensor or loose connector.

• Whirlpool Microwave E03 Error - Causes & Fix

  31 May, 2026

  E03 means the keypad or user interface has failed or is sending bad signals to the control board. Reset power and check for stuck keys.

• Whirlpool Range SAB Error Code - Causes & Fix

  31 May, 2026

  SAB is not an error. It means Sabbath Mode is on. Turn it off using your model's menu or press Cancel/Off, or reset power at the breaker.

• Whirlpool Range FC E3 Error - Causes & Fix

  31 May, 2026

  FC E3 means your Whirlpool range can't connect to your Wi-Fi router. Reset power and router first, then check signal strength.

• Whirlpool Range F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on a Whirlpool range means the control board could not execute a function. Power reset is the first step to clear the fault.

• Whirlpool Range PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure detected by the control. Press Cancel to clear. If it returns, check supply voltage or replace the control.

• Whirlpool Range A6 Error Code - Causes & Fix

  31 May, 2026

  A6 is not a standard Whirlpool range code. You likely see F7 E6, which means a cooling fan or wiring fault. Reset power first.

• Whirlpool Range AB Error Code - Causes & Fix

  31 May, 2026

  AB or SAB on a Whirlpool range usually means Sabbath Mode is active. Exit the mode using your owner's manual button sequence.

• Whirlpool Range LOC Error Code - Causes & Fix

  31 May, 2026

  LOC on a Whirlpool range means the control lock feature is active, not a fault. Hold START/ENTER for 5 seconds to unlock the keypad.

• Whirlpool Range LOC Error Code - Causes & Fix

  31 May, 2026

  LOC means Control Lock is on, not a fault. Hold START/ENTER for 5 seconds to unlock, or reset power for 1 minute if it stays locked.

• Whirlpool Range FC E5 Error - Causes & Fix

  31 May, 2026

  FC E5 on a Whirlpool range means a Wi‑Fi antenna or wiring fault. Reset power at the breaker for one minute to clear the code.

• Whirlpool FC E4 Error Code - Causes & Fix

  31 May, 2026

  FC E4 on a Whirlpool range means a communication fault between the oven control and appliance manager. Reset power at the breaker first.

• Whirlpool Range FC E2 Error - Causes & Fix

  31 May, 2026

  FC E2 means a control or user-interface communication fault. Most often fixed by reseating the UI harness or replacing the touchpad or main control.

• Whirlpool Range F9 Error Code - Causes & Fix

  31 May, 2026

  F9 or F9 E0 on a Whirlpool range means the control detected a wiring or supply voltage problem. Reset the breaker first.

• Whirlpool Range F8 Error Code - Causes & Fix

  31 May, 2026

  F8 E0 on a Whirlpool range means the cooling fan is running too slow or stalled. Clear obstructions or replace the fan motor or sensor.

• Whirlpool Range F5 Error Code - Causes & Fix

  31 May, 2026

  F5 means a door-latch or door-switch circuit fault. The most common fix is replacing the latch assembly or latch switch.

• Whirlpool Range F4 Error Code - Causes & Fix

  31 May, 2026

  F4 on a Whirlpool range signals a control or wiring fault. Reset power at the breaker for one minute to clear the EOC glitch.

• Whirlpool F3 Error Code - Causes & Fix

  31 May, 2026

  F3 means oven temperature sensor fault. Most often fixed by replacing the oven temp sensor. Also check wiring and control board.

• Whirlpool Range F2 Error Code - Causes & Fix

  31 May, 2026

  F2 on a Whirlpool range means a fault in the oven temperature sensor, control board, or wiring. Power-cycle first, then check sensor resistance.

• Whirlpool Range F1 Error Code - Causes & Fix

  31 May, 2026

  F1 on a Whirlpool range signals an internal electronic control failure. Most often the oven control board has failed and needs replacement.

• Whirlpool Range F0 Error Code - Causes & Fix

  31 May, 2026

  F0 E0 means the control board can't identify the fault. Most likely fix: power reset at the breaker, then replace the control board if it returns.

• Whirlpool Oven AB Error Code - Causes & Fix

  31 May, 2026

  AB (SAB/5AB/5A6) means Sabbath Mode is active on your Whirlpool oven. Exit the mode using your model's manual procedure to restore normal operation.

• Whirlpool Oven PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure detected. Clear the code by pressing Cancel, then reset your breaker for one minute to restore normal operation.

• Whirlpool Oven A6 Error Code - Causes & Fix

  31 May, 2026

  A6 may be a misread display. Whirlpool's official F6 E6 code points to upper oven control or wiring. Reset at breaker first.