Tag: whirlpool

All the articles with the tag "whirlpool".

• Whirlpool Refrigerator E9 Error Code - Causes & Fix

  30 May, 2026

  E9 is a freezer high temperature alarm. Start with the door seal and airflow, then check the evaporator fan motor and the freezer sensor.

• Whirlpool Refrigerator PO Error Code - Causes & Fix

  30 May, 2026

  PO means a power outage raised your freezer above 18F. Confirm it on the display and check temps, no parts needed in most cases.

• Whirlpool Refrigerator SY CE Error Code - Causes & Fix

  30 May, 2026

  SY CE means a communication error between the control board and the display. The usual fix is reseating wiring then replacing the UI or control board.

• Whirlpool Refrigerator SY EF Error Code - Causes & Fix

  30 May, 2026

  SY EF means the board lost feedback from the evaporator fan. The common fix is clearing coil ice or replacing the evaporator fan motor.

• Whirlpool Microwave F2 Error Code - Causes & Fix

  30 May, 2026

  F2 or F2H2 on a Whirlpool microwave points to a failed vent fan/light switch or bad wiring. Power-cycle first, then check the switch.

• Whirlpool Washer F02 Error Code - Causes & Fix

  30 May, 2026

  F02 means your Whirlpool washer is draining too slowly, usually from a clogged drain pump filter, blocked hose, or excess suds.

• Whirlpool Washer F20 Error Code - Causes & Fix

  30 May, 2026

  F20 means your Whirlpool front load washer is getting no water or too little. Check the supply and screens, then the water inlet valve.

• Whirlpool Washer F21 Error Code - Causes & Fix

  30 May, 2026

  F21 means your Whirlpool washer is not draining or draining too slowly. The usual fix is clearing a clogged drain pump filter or hose.

• Whirlpool Washer F5E1 Error Code - Causes & Fix

  30 May, 2026

  F5E1 means the control cannot confirm the lid or door lock state. Check for obstructions, then test and replace the lock assembly.

• Whirlpool Washer F5E2 Error Code - Causes & Fix

  30 May, 2026

  F5E2 means your Whirlpool washer lid or door is not locking. Clear any obstruction, then test and replace the lock assembly.

• Whirlpool Washer F5E3 Error Code - Causes & Fix

  30 May, 2026

  F5E3 means your Whirlpool washer door or lid is not locking properly. The fix is usually replacing the lid lock or door lock assembly.

• Whirlpool Washer F7E1 Error Code - Causes & Fix

  30 May, 2026

  F7E1 means your Whirlpool washer cannot sense correct motor speed. Check for a jammed basket first, then the shift actuator or motor.

• Whirlpool Washer F8E1 Error Code - Causes & Fix

  30 May, 2026

  F8E1 means your Whirlpool washer is not sensing enough incoming water. Check the valves and inlet screens, then the water inlet valve.

• Whirlpool Washer F9E1 Error Code - Causes & Fix

  30 May, 2026

  F9E1 means your Whirlpool washer is taking too long to drain. Start by clearing the drain pump filter and hose, then test the pump.

• Whirlpool Washer Sud Error Code - Causes & Fix

  30 May, 2026

  Sud means your Whirlpool washer detects too many suds to spin. Switch to HE detergent and clear the drain pump filter to fix it.

• Whirlpool Microwave F7 Error - Causes & Fix

  30 May, 2026

  F7 means magnetron power or inverter fault on most Whirlpool inverter microwaves. Usually a failed inverter board or shorted magnetron.

• Whirlpool Dryer F1E1 Error Code - Causes & Fix

  30 May, 2026

  F1E1 signals a control board fault. Power-cycle the dryer for 5 minutes, then test. If the code returns, replace the control board.

• Whirlpool Washer F7 E1 Error Code - Causes & Fix

  30 May, 2026

  F7 E1 means the motor can't reach the correct speed. The most common fix is replacing the shift actuator or checking loose wiring.

• Whirlpool Dryer F23 Error Code - Causes & Fix

  30 May, 2026

  F23 means outlet thermistor failure. Most common fix: replace the outlet temperature sensor or repair its wiring and connectors.

• Whirlpool Microwave F6 Error Code - Causes & Fix

  30 May, 2026

  F6 means the microwave could not execute the function. Usually caused by a failed relay control board or damaged wiring.

• Whirlpool Oven F2 E0 Error Code - Causes & Fix

  30 May, 2026

  F2 E0 means a user interface or keypad fault. Reset power for 1 minute. If the code returns, check for stuck keys or loose connections.

• Whirlpool Dishwasher F8E4 Error Code - Causes & Fix

  30 May, 2026

  F8E4 means water in the base drip tray triggered the float switch. Most often a loose inlet fitting or internal leak.

• Whirlpool Dishwasher F9E1 Error - Causes & Fix

  30 May, 2026

  F9E1 means your Whirlpool dishwasher can't drain. Check the disposer knockout plug, kinked drain hose, and blockages first.

• Whirlpool Dryer F24 Error Code - Causes & Fix

  30 May, 2026

  F24 means a generic control fault in Whirlpool dryers. Power off at breaker for 5 minutes, restore, run Timed Dry. Code persists? Call service.