Tag: symptom
All the articles with the tag "symptom".
-
GE Dryer No Power - Causes & Fix
A tripped breaker or missing leg of 240 V supply is the most common cause. Reset the breaker fully off then on and verify 120 V on each leg.
-
GE Dryer Won't Tumble - Causes & Fix
Usually a broken drive belt or open thermal fuse stops the drum. Check belt first, then test the fuse and door switch for continuity.
-
GE Dryer Takes Too Long to Dry - Causes & Fix
Most often caused by a clogged lint filter or blocked exhaust vent restricting airflow. Clean the filter and inspect the full duct run.
-
GE Dryer Won't Start - Causes & Fix
Usually a tripped breaker, failed door switch, or blown thermal fuse. Check the door light first to confirm power, then test safety switches.
-
GE Dryer Not Heating - Causes & Fix
A GE dryer not heating is usually caused by incorrect voltage at the breaker panel or a failed igniter (gas) or heating element (electric).
-
Maytag Dryer No Power - Causes & Fix
Most often caused by a tripped breaker or blown fuse. Electric dryers need both legs of 240-volt supply, so check and reset both breakers first.
-
Maytag Dryer Shuts Off Early - Causes & Fix
Restricted airflow from clogged vents or lint buildup is the most common cause. Clean the lint screen, vent hose, and exterior exhaust first.
-
Maytag Dryer Squeaking - Causes & Fix
Squeaking usually comes from loose dryer legs, a worn idler pulley, or worn drum support rollers. Level the dryer and inspect wear parts.
-
Maytag Dryer Stops Mid-Cycle - Causes & Fix
Usually caused by blocked venting or dirty moisture sensors. Clean the lint filter, exhaust duct, and sensor bars first.
-
Maytag Dryer Won't Tumble - Causes & Fix
Most often a broken drive belt or unlatched door. Check the door latch first, then open the cabinet and inspect the belt around the drum.
-
Maytag Dryer Takes Too Long to Dry - Causes & Fix
Usually caused by a clogged lint screen or blocked vent hose. Clean the screen, check the vent hose is rigid and unkinked, and verify the outdoor vent hood opens freely.
-
Maytag Dryer Won't Start - Causes & Fix
Most often a failed door switch or blown thermal fuse. Check power, door latch, control lock, then test the switch and fuse.
-
Maytag Dryer Not Heating - Causes & Fix
Most often low voltage at the outlet or a blown thermal fuse. Check 240V supply at the terminal block and test the fuse for continuity.
-
Whirlpool Dryer No Power - Causes & Fix
Most often caused by a tripped breaker or blown fuse at the home panel. Reset both breakers or replace both fuses and check for 240 volts at the outlet.
-
Whirlpool Dryer Squeaking - Causes & Fix
Squeaking usually comes from a worn idler pulley or lint buildup on belts and pulleys. Check leveling, clean lint, and inspect pulleys.
-
Whirlpool Dryer Stops Mid Cycle - Causes & Fix
Usually restricted airflow from lint buildup or blocked venting causes overheating and safety shutdown. Clean the lint screen, vent hose, and exterior vent to restore full airflow.
-
Whirlpool Dryer Won't Tumble - Causes & Fix
Usually caused by a broken drive belt or a door that isn't fully latched. Check power, door latch, and belt first.
-
Whirlpool Dryer Takes Too Long to Dry - Causes & Fix
Usually caused by a restricted airflow path. Clean the lint screen, check for kinked or crushed vent hose, and inspect the outdoor exhaust vent.
-
Whirlpool Dryer Won't Start - Causes & Fix
Most often Control Lock is enabled or the door isn't fully latched. Unlock the control or reseat the door to restore operation.
-
Whirlpool Dryer Not Heating - Causes & Fix
Usually caused by a tripped breaker on one leg of the 240V supply. Check that both breakers are on and reset them if needed.
-
LG Dryer Squeaking - Causes & Fix
A squeaking LG dryer usually has worn drum support rollers or a loose drum support shaft. Replace the worn rollers and inspect the shaft.
-
LG Dryer No Power - Causes & Fix
Most often a tripped circuit breaker or loose power cord. Reset the breaker, check the cord connection at the outlet and dryer, then test.
-
LG Dryer Stops Mid Cycle - Causes & Fix
Usually dirty moisture sensors or a too-small load. Clean the sensor bars below the lint filter with a damp rag and retest.
-
LG Dryer Takes Too Long to Dry - Causes & Fix
Usually caused by restricted airflow from a clogged lint filter or dirty humidity sensor. Clean the filter and sensor, then check the exhaust vent.