Tag: samsung

All the articles with the tag "samsung".

• Samsung Microwave E-04 Error - Causes & Fix

  31 May, 2026

  E-04 means Cooking Time Setting Over Error in convection mode. Reset power for 60 seconds and re-enter a valid time to clear it.

• Samsung C-A2 Error Code - Causes & Fix

  31 May, 2026

  C-A2 on Samsung combination microwave/wall ovens means cooling fan failure. Most common fix: replace the blower fan or repair its burned connector.

• Samsung Microwave E-01 Error - Causes & Fix

  31 May, 2026

  E-01 means an open circuit is detected. Unplug the microwave for 60 seconds, then restore power to clear the code and test again.

• Samsung C-70 Microwave Error - Causes & Fix

  31 May, 2026

  C-70 means a steam sensor fault. Most common fix: unplug 60 seconds to reset, dry out any moisture, check sensor wiring.

• Samsung E-52 Error Code - Causes & Fix

  31 May, 2026

  E-52 means EEPROM short error on the main control board. Reset power for 60 seconds. If it returns, replace the control board.

• Samsung Microwave E-51 Error - Causes & Fix

  31 May, 2026

  E-51 means Sense Failure on Samsung microwaves. Usually caused by a stuck key, dirty ribbon cable, or failed control board. Fix with reset or keypad replacement.

• Samsung E-47 Error Code - Causes & Fix

  31 May, 2026

  E-47 means Door Open Error. The microwave thinks the door is ajar. Most often a faulty latch or interlock switch is the cause.

• Samsung Microwave E-46 Error - Causes & Fix

  31 May, 2026

  E-46 means Primary Open Error: an open circuit in the temperature sensor. Reset power first, then check the sensor and wiring.

• Samsung Microwave E-41 Error - Causes & Fix

  31 May, 2026

  E-41 means an open Easy/PH sensor error. Unplug for 60 seconds and retry. If the code returns, a technician must check the sensor or board.

• Samsung E-36 Error Code - Causes & Fix

  31 May, 2026

  E-36 means Door Open Error. The microwave thinks the door is ajar. Most often fixed by closing the door firmly or adjusting the latch.

• Samsung Microwave E-32 Error - Causes & Fix

  31 May, 2026

  E-32 means a short gas sensor error. Power-cycle the microwave for 60 seconds first. If it returns, call a technician for service.

• Samsung Microwave E-33 Error - Causes & Fix

  31 May, 2026

  E-33 means Under Weight Error: the microwave sees too little weight for the auto-cook mode. Reset power first, then check load size.

• Samsung Microwave E-26 Error - Causes & Fix

  31 May, 2026

  E-26 means temperature not detected during cook cycle. Usually a failed sensor, bad wiring, or control board. Reset power first.

• Samsung Microwave E-25 Error - Causes & Fix

  31 May, 2026

  E-25 means Micro Cook Abnormal Temperature Error. Unplug for 60 seconds and restart. If code returns, call Samsung service.

• Samsung Microwave E-24 Error Code - Causes & Fix

  31 May, 2026

  E-24 on Samsung microwaves means over-temperature detected. Let unit cool, restart. If it returns, check the temp sensor or call service.

• Samsung E-23 Microwave Error - Causes & Fix

  31 May, 2026

  E-23 means T1 Max Time Error on Samsung microwaves. Power-cycle for 60 seconds. If the code returns, contact Samsung service.

• Samsung E-13 Error Code - Causes & Fix

  31 May, 2026

  E-13 means T1 max time gas sensor error on Samsung microwaves. Unplug for 60 seconds and retest. Persistent code needs sensor repair.

• Samsung Microwave E-06 Error - Causes & Fix

  31 May, 2026

  E-06 means a swing heater error. Reset power for 60 seconds. If the code returns, a faulty heater or control board needs service.

• Samsung Microwave E-05 Error - Causes & Fix

  31 May, 2026

  E-05 means a cooking time setting over error in combination mode. Most often fixed by a 60-second power reset and re-entering valid time.

• Samsung Microwave E-03 Error - Causes & Fix

  31 May, 2026

  E-03 means grill cooking time is set outside the valid range. Clear the error by unplugging for 60 seconds and re-entering settings.

• Samsung Microwave E-02 Error - Causes & Fix

  31 May, 2026

  E-02 means Cooking Time Setting Over Error. The microwave detected an invalid time setting. Most cases clear after unplugging for 60 seconds.

• Samsung Microwave C-F2 Error Code - Causes & Fix

  31 May, 2026

  C-F2 means touch key communication failure. Most often fixed by unplugging for 2 minutes or replacing the touchpad or control board.

• Samsung Microwave C-F1 Error Code - Causes & Fix

  31 May, 2026

  C-F1 means a control-board communication fault during memory read/write. Usually fixed by power cycling or replacing the main control PCB.

• Samsung Microwave C-F0 Error - Causes & Fix

  31 May, 2026

  C-F0 means no communication between main and sub boards. Most often caused by loose harness or damaged wiring. Power reset first.