Tag: oven

All the articles with the tag "oven".

• GE Range F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on a GE range means a keypad or control-interface fault. The keypad assembly or control board is usually the fix.

• GE Range F97 Error Code - Causes & Fix

  31 May, 2026

  F97 means an internal component has failed, typically the lower cooling fan or its circuit. Most repairs need the fan replaced.

• GE Range F96 Error Code - Causes & Fix

  31 May, 2026

  F96 means the upper oven cooling fan speed is too low. Usually caused by a failed fan motor, bad sensor, or wiring issue.

• GE Range F9 Error Code - Causes & Fix

  31 May, 2026

  F9 on a GE range means door latch fault. Most common fix: clean the latch path of grease and debris, then reset power.

• GE Range F8 Error Code - Causes & Fix

  31 May, 2026

  F8 on a GE range usually means a control board fault or door latch problem. Most often fixed by replacing the main control board.

• GE Range F6 Error Code - Causes & Fix

  31 May, 2026

  F6 on a GE range means a keypanel problem. The keypad assembly usually needs replacement. Learn how to diagnose and fix it.

• GE Range F7 Error Code - Causes & Fix

  31 May, 2026

  F7 on a GE range means a stuck or shorted keypad button. Clean the ribbon cable contacts or replace the membrane keypad to fix it.

• GE Range F4 Error Code - Causes & Fix

  31 May, 2026

  F4 means shorted or low-resistance oven sensor. Most common fix: replace the oven temperature sensor after testing resistance at 1100 Ω.

• GE Range F3 Error Code - Causes & Fix

  31 May, 2026

  F3 means the oven sensor circuit is out of range. The most common fix is replacing the oven temperature sensor probe.

• GE Range F20 Error Code - Causes & Fix

  31 May, 2026

  F20 means your GE oven detected an over-temperature condition. Most common fix: replace the oven temperature sensor or control board.

• GE Range F2 Error Code - Causes & Fix

  31 May, 2026

  F2 on a GE range means the oven overheated beyond a preset limit. The most common fix is replacing the oven temperature sensor.

• GE Range F0 Error Code - Causes & Fix

  31 May, 2026

  F0 on a GE range means a stuck or failed keypad. The most common fix is to replace the touchpad or control board.

• Whirlpool Range PF Error Code - Causes & Fix

  31 May, 2026

  PF means power failure detected by the control. Press Cancel to clear. If it returns, check supply voltage or replace the control.

• Whirlpool Range A6 Error Code - Causes & Fix

  31 May, 2026

  A6 is not a standard Whirlpool range code. You likely see F7 E6, which means a cooling fan or wiring fault. Reset power first.

• Whirlpool Range AB Error Code - Causes & Fix

  31 May, 2026

  AB or SAB on a Whirlpool range usually means Sabbath Mode is active. Exit the mode using your owner's manual button sequence.

• Whirlpool Range LOC Error Code - Causes & Fix

  31 May, 2026

  LOC on a Whirlpool range means the control lock feature is active, not a fault. Hold START/ENTER for 5 seconds to unlock the keypad.

• Whirlpool Range LOC Error Code - Causes & Fix

  31 May, 2026

  LOC means Control Lock is on, not a fault. Hold START/ENTER for 5 seconds to unlock, or reset power for 1 minute if it stays locked.

• Whirlpool Range FC E5 Error - Causes & Fix

  31 May, 2026

  FC E5 on a Whirlpool range means a Wi‑Fi antenna or wiring fault. Reset power at the breaker for one minute to clear the code.

• Whirlpool FC E4 Error Code - Causes & Fix

  31 May, 2026

  FC E4 on a Whirlpool range means a communication fault between the oven control and appliance manager. Reset power at the breaker first.

• Whirlpool Range FC E2 Error - Causes & Fix

  31 May, 2026

  FC E2 means a control or user-interface communication fault. Most often fixed by reseating the UI harness or replacing the touchpad or main control.

• Whirlpool Range F9 Error Code - Causes & Fix

  31 May, 2026

  F9 or F9 E0 on a Whirlpool range means the control detected a wiring or supply voltage problem. Reset the breaker first.

• Whirlpool Range F8 Error Code - Causes & Fix

  31 May, 2026

  F8 E0 on a Whirlpool range means the cooling fan is running too slow or stalled. Clear obstructions or replace the fan motor or sensor.

• Whirlpool Range F5 Error Code - Causes & Fix

  31 May, 2026

  F5 means a door-latch or door-switch circuit fault. The most common fix is replacing the latch assembly or latch switch.

• Whirlpool Range F4 Error Code - Causes & Fix

  31 May, 2026

  F4 on a Whirlpool range signals a control or wiring fault. Reset power at the breaker for one minute to clear the EOC glitch.