Tag: oven

All the articles with the tag "oven".

• Frigidaire Oven F90 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F90 means the door unlock timed out after self-clean. The usual fix is replacing the motor door latch assembly that runs the lock.

• GE Oven F0 Error Code - Causes & Fix

  30 May, 2026

  GE oven F0 means a stuck key or shorted touch panel. Most fixes start by reseating the ribbon cable, then replacing the control panel.

• GE Oven F1 Error Code - Causes & Fix

  30 May, 2026

  GE oven F1 is a control relay fault that locks out the range as a safety step. The usual fix is replacing the electronic oven control board.

• GE Oven F4 Error Code - Causes & Fix

  30 May, 2026

  GE oven F4 means the temperature sensor reads shorted, under about 950 ohms. The common fix is replacing the RTD oven temperature sensor.

• GE Oven F5 Error Code - Causes & Fix

  30 May, 2026

  GE oven F5 points to a fault in the electronic oven control supervisory or relay circuit. The fix is usually replacing the control board.

• GE Oven F9 Error Code - Causes & Fix

  30 May, 2026

  GE oven F9 means a door lock fault, often during self clean. The common fix is replacing the door lock motor and switch assembly.

• GE Oven FC Error Code - Causes & Fix

  30 May, 2026

  GE oven FC is a door lock circuit fault, often during self clean. The usual fix is freeing the latch or replacing the door lock motor assembly.

• GE Oven FD Error Code - Causes & Fix

  30 May, 2026

  GE oven FD points to the meat probe or its receptacle. Start by unplugging the probe, and if FD clears, replace the meat probe.

• LG Oven F1 Error Code - Causes & Fix

  30 May, 2026

  F1 means the upper oven temperature sensor reads an open circuit. The most likely fix is replacing the oven thermistor sensor.

• LG Oven F10 Error Code - Causes & Fix

  30 May, 2026

  F10 means the upper oven door lock system failed during operation. The most likely fix is replacing the door lock motor assembly.

• LG Oven F11 Error Code - Causes & Fix

  30 May, 2026

  F11 means the main control board and display board lost communication. The most likely fix is reseating ribbon cables or replacing the main control board.

• LG Oven F17 Error Code - Causes & Fix

  30 May, 2026

  F17 means the control cannot detect the convection fan for over a minute. The most likely fix is replacing the convection fan motor.

• LG Oven F4 Error Code - Causes & Fix

  30 May, 2026

  F4 means the lower oven temperature sensor reads an open circuit. The most likely fix is replacing the lower oven thermistor.

• LG Oven F6 Error Code - Causes & Fix

  30 May, 2026

  F6 means the upper oven ran too hot, often past 650F outside self clean. The usual fix is replacing the oven temperature sensor.

• LG Oven F7 Error Code - Causes & Fix

  30 May, 2026

  F7 means the upper convection fan is not turning as expected. The most likely fix is replacing the convection fan motor.

• LG Oven F8 Error Code - Causes & Fix

  30 May, 2026

  F8 means the oven meat probe circuit is shorted. The most likely fix is replacing the meat probe or its burnt cavity socket.

• Samsung Oven C-21 Error Code - Causes & Fix

  30 May, 2026

  C-21 means the oven climbed past a safe temperature. A drifting temperature sensor is the usual cause, so test and replace it first.

• Samsung Oven C-20 Error Code - Causes & Fix

  30 May, 2026

  C-20 means the oven temperature sensor is open or shorted. Most fixes come down to replacing the oven temperature sensor.

• Samsung Oven C-d0 Error Code - Causes & Fix

  30 May, 2026

  C-d0 means a key looks stuck or the door lock will not register. Clean the panel and latch first, then replace the lock or membrane.

• Samsung Oven C-d1 Error Code - Causes & Fix

  30 May, 2026

  C-d1 points to a door lock fault where the latch will not move or report its position. The fix is usually a new door lock assembly.

• Samsung Oven E-08 Error Code - Causes & Fix

  30 May, 2026

  E-08 means the oven is not reaching the set temperature. A failed bake element is the most common cause on electric models.

• Samsung Oven E-27 Error Code - Causes & Fix

  30 May, 2026

  E-27 means the oven temperature sensor circuit reads open. The usual fix is testing and replacing the temperature sensor.

• Samsung Oven E-28 Error Code - Causes & Fix

  30 May, 2026

  E-28 means the oven temperature sensor circuit reads shorted. Test the sensor and replace it if it is far off 1080 ohms.

• Samsung Oven E-OE Error Code - Causes & Fix

  30 May, 2026

  E-OE means the oven door lock did not move or report the right state. The fix is usually a new door lock motor and latch assembly.