Tag: kitchenaid

All the articles with the tag "kitchenaid".

• KitchenAid Refrigerator E6 Error Code - Causes & Fix

  31 May, 2026

  E6 means Dispenser UI EEPROM Faulty on KitchenAid refrigerators. The dispenser user interface board has failed and typically needs replacement.

• KitchenAid Refrigerator E5 Error Code - Causes & Fix

  31 May, 2026

  E5 means ice maker thermistor and ice room thermistor readings don't match. Most often the ice box thermistor has failed.

• KitchenAid Refrigerator E4 Error Code - Causes & Fix

  31 May, 2026

  E4 means ice maker problem. Most common fix: check water supply to ice maker and confirm ice bin is seated correctly.

• KitchenAid Refrigerator E2 Error Code - Causes & Fix

  31 May, 2026

  E2 indicates an ice maker motor or thermistor fault. Most common fix is replacing the ice maker assembly or thermistor sensor.

• KitchenAid Refrigerator E1 Error Code - Causes & Fix

  31 May, 2026

  E1 on KitchenAid refrigerators usually means ice maker cooling failure or a thermistor fault. Power reset first, then check sensor.

• KitchenAid Refrigerator E0 Error Code - Causes & Fix

  31 May, 2026

  E0 on KitchenAid refrigerators often means 'No Errors' in ice-maker diagnostics, or a communication fault in some models. Reset power first.

• KitchenAid H2O Error Code - Causes & Fix

  30 May, 2026

  H2O means your KitchenAid dishwasher isn't getting enough water. Check that the supply valve under the sink is fully open and the hose isn't kinked.

• KitchenAid FAE5 Error Code - Causes & Fix

  30 May, 2026

  FAE5 means the dishwasher stopped, drained, and threw an error. Usually caused by water in the base pan triggering the leak sensor.

• KitchenAid Dishwasher F8E5 Error Code - Causes & Fix

  30 May, 2026

  F8E5 means overfill/flood detected. The dishwasher drains and locks out. Most often caused by a stuck inlet valve or control issue.

• KitchenAid F7E2 Error Code - Causes & Fix

  30 May, 2026

  F7E2 means the wash motor is locked or stalled. Most often fixed by clearing debris from the pump or replacing the wash motor.

• KitchenAid F8E2 Error Code - Causes & Fix

  30 May, 2026

  F8E2 means a drain pump electrical fault. Most likely fix: replace the drain pump or repair its wiring harness and connectors.

• KitchenAid Dishwasher F6E3 Error Code - Causes & Fix

  30 May, 2026

  F6E3 means excessive suds detected in the tub. Usually caused by wrong detergent or too much detergent. Clear foam and run empty cycles.

• KitchenAid F3E2 Error Code - Causes & Fix

  30 May, 2026

  F3E2 on KitchenAid ovens/ranges signals a faulty oven or warming-drawer temperature sensor. Power-cycle first, then check the sensor.

• KitchenAid F1E2 Dishwasher Error - Causes & Fix

  30 May, 2026

  F1E2 means a failed or incompatible electronic control board. Most often you'll replace the main control to clear the fault.

• KitchenAid Dishwasher F1E1 Error - Causes & Fix

  30 May, 2026

  F1E1 means a stuck relay on the control board. The dishwasher drains then stops. Fix: power reset first, then replace the board.

• KitchenAid Dishwasher F2E2 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F2E2 means the user interface cannot talk to the control board. Reseat the ribbon and harness, then replace the failed board.

• KitchenAid Dishwasher F3E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F3E1 points to a thermistor or OWI sensor failure. Clean the sensor first, then replace the thermistor and OWI if it stays.

• KitchenAid Dishwasher F5E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F5E1 means the control does not see the door latched. The common fix is the door latch and switch assembly or its wiring.

• KitchenAid Dishwasher F6E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E1 means the dishwasher did not fill with enough water in time. Most fixes start at the water inlet valve and its inlet screen.

• KitchenAid Dishwasher F6E2 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E2 flags a water inlet valve failure. The fix is usually a clogged inlet screen, a wiring fault, or a new inlet valve.

• KitchenAid Dishwasher F6E4 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F6E4 means the overfill float switch is open or stuck. The common fix is freeing the float or replacing the float switch.

• KitchenAid Dishwasher F7E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F7E1 means the heating element is not heating the water. The common fix is testing and replacing the heating element.

• KitchenAid Dishwasher F8E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F8E1 means a slow drain. Clear the drain path and filter first, then test or replace the drain pump if water still lingers.

• KitchenAid Dishwasher F9E1 Error Code - Causes & Fix

  30 May, 2026

  KitchenAid F9E1 means the control cannot detect the diverter disc position. The common fix is the diverter motor and disc assembly.