Tag: ge

All the articles with the tag "ge".

• GE Oven FD Error Code - Causes & Fix

  30 May, 2026

  GE oven FD points to the meat probe or its receptacle. Start by unplugging the probe, and if FD clears, replace the meat probe.

• GE Refrigerator CC Error Code - Causes & Fix

  30 May, 2026

  CC means the control cannot keep the fridge at the set temperature. The common fix is a new thermistor, inverter board, or main control board.

• GE Refrigerator CF Error Code - Causes & Fix

  30 May, 2026

  CF means a communication failure between the main control board and the user interface. The common fix is repairing wiring or replacing a board.

• GE Refrigerator CI Error Code - Causes & Fix

  30 May, 2026

  CI means the ice maker is not operating correctly and is not making ice. The common fix is a new water inlet valve or ice maker assembly.

• GE Refrigerator dE Error Code - Causes & Fix

  30 May, 2026

  dE means the automatic defrost cycle has not run correctly in 24 hours. The common fix is replacing the defrost heater or defrost thermostat.

• GE Refrigerator dS Error Code - Causes & Fix

  30 May, 2026

  dS means the control reads a door as open when it is shut, or the reverse. The common fix is replacing a failed door switch.

• GE Refrigerator H2O Error Code - Causes & Fix

  30 May, 2026

  H2O is the GE reminder that the water filter is due for replacement. The fix is installing a new filter and resetting the indicator.

• GE Refrigerator HS Error Code - Causes & Fix

  30 May, 2026

  HS means the humidity sensor near the crisper is reading out of range. The common fix is replacing the humidity sensor or its wiring.

• GE Refrigerator PF Error Code - Causes & Fix

  30 May, 2026

  PF means the power to the refrigerator was interrupted and restored. The usual fix is pressing any control button to clear the code.

• GE Microwave F1 Error Code - Causes & Fix

  30 May, 2026

  F1 means open thermal sensor on GE convection microwaves. Most common fix: replace the cavity thermistor or repair its wiring.

• GE Oven F7 Error Code - Causes & Fix

  30 May, 2026

  F7 means keypad or control-panel fault. Most often a stuck button, shorted membrane, or bad ribbon contact. Reseat or replace the keypad.

• GE Oven F3 Error Code - Causes & Fix

  30 May, 2026

  F3 means a faulty oven temperature sensor or circuit. Replace the sensor if it reads outside 1,000–1,100 ohms at room temp.

• GE Dishwasher C2 Error Code - Causes & Fix

  30 May, 2026

  C2 means pump-out took over 7 minutes. Usually a blocked drain hose, air gap, or disposer knockout plug. Clear the drain path first.

• GE Refrigerator FF Error Code - Causes & Fix

  30 May, 2026

  FF means the freezer has lost normal temperature. Most often caused by door seal problems or ice blocking airflow. Reset and defrost.

• GE Refrigerator dF Error Code - Causes & Fix

  30 May, 2026

  dF means the defrost system failed to run in the last 24 hours. Most often the defrost heater or thermostat has failed.

• GE Dryer E63 Error Code - Causes & Fix

  30 May, 2026

  E63 on a GE dryer is not a standard GE code. Verify your exact model number. On other brands E63 means heating element fault or control board communication error.

• GE Oven F2 Error Code - Causes & Fix

  30 May, 2026

  F2 means your GE oven temperature exceeded a safe threshold. The oven temperature sensor is the most common fix.

• GE Dishwasher H2O Error Code - Causes & Fix

  30 May, 2026

  H2O means insufficient water during fill. Most often caused by a closed supply valve, clogged inlet screen, or failing inlet valve.

• GE Dryer E61 Error Code - Causes & Fix

  30 May, 2026

  E61 means a heating circuit fault. The dryer calls for heat but gets no response. Most common cause is a burned-out heating element.

• GE Microwave F3 Error Code - Causes & Fix

  30 May, 2026

  F3 error means a shorted or stuck keypad/touchpad. Most common fix: unplug for 2 minutes, clean the keypad, or replace the membrane switch.

• GE Dishwasher Error Code LC — Leak Detected Fix

  21 May, 2026

  GE dishwasher error LC means the leak-detection sensor at the bottom of the cabinet (a small float switch in the base pan or, on newer Profile models, a...

• GE Refrigerator Error Code Er — Diagnostic Guide

  21 May, 2026

  GE Profile, Cafe, and Monogram refrigerators show "Er" on the dispenser display when the main board has lost communication with one of its sensor inputs —...

• GE Washer Error Code E1 — Front-Load Inlet Fix

  21 May, 2026

  GE front-load washer error E1 (sometimes paired with E2 on some models) means the control board started a fill cycle but didn't see the tub reach target...

• GE Industrial Circuit Breaker Fault Codes - Complete Guide

  22 Apr, 2026

  GE Industrial (ABB, Grid Solutions) MCCB and power circuit breaker fault codes: DECS trip unit alarms, causes, and reset procedures.