Tag: frigidaire

All the articles with the tag "frigidaire".

• Frigidaire Dryer AL-04 Error Code - Causes & Fix

  30 May, 2026

  AL-04 / E4 / E4A means restricted airflow or no heat causing prolonged drying. Most often: clean lint screen and check your vent system.

• Frigidaire Dryer AL-02 Error Code - Causes & Fix

  30 May, 2026

  AL-02 is not a verified Frigidaire code. If you see AD, it means moisture sensor fault. Clean sensor bars or check vent blockage first.

• Frigidaire Washer E24 Error Code - Causes & Fix

  30 May, 2026

  E24 means the drain pump relay on the control board has failed. The most common fix is replacing the main control board.

• Frigidaire Washer EF2 Error Code - Causes & Fix

  30 May, 2026

  EF2 means too many suds detected in your Frigidaire washer. Most common fix: switch to HE detergent and use less of it.

• Frigidaire Washer EB1 Error Code - Causes & Fix

  30 May, 2026

  EB1 means incoming power frequency is out of limits. Most often caused by a generator or unstable supply, not a washer fault.

• Frigidaire E95 Error Code - Causes & Fix

  30 May, 2026

  E95 means control boards can't communicate. Most likely fix: power-reset the washer and reseat all control-board connectors.

• Frigidaire E47 Error Code - Causes & Fix

  30 May, 2026

  E47 means door-lock circuit fault during spin. Usually a failed door lock assembly. Check lock resistance (1,100–1,700 Ω) and replace if open.

• Frigidaire Washer E46 Error Code - Causes & Fix

  30 May, 2026

  E46 means a board communication fault in Frigidaire front-load washers. The most likely fix is replacing the main control board.

• Frigidaire Washer E45 Error Code - Causes & Fix

  30 May, 2026

  E45 means control board communication failure. Most often fixed by replacing the main control board after checking wiring and connectors.

• Frigidaire E44 Error Code - Causes & Fix

  30 May, 2026

  E44 means a door-lock circuit fault. Most often the door lock assembly has failed. Check the lock, wiring, and control board.

• Frigidaire Washer E23 Error Code - Causes & Fix

  30 May, 2026

  E23 means the drain pump relay on the control board has failed. Most often you'll replace the main electronic control board.

• Frigidaire E21 Error Code - Causes & Fix

  30 May, 2026

  E21 means slow drain or drain fault. Most often caused by a kinked hose or clogged pump. Check hose routing and clear debris from pump.

• Frigidaire E14 Error Code - Causes & Fix

  30 May, 2026

  E14 means the washer detects the dispenser drawer is open or not seated. Most often fixed by cleaning residue and reseating the drawer.

• Frigidaire Washer E13 Error Code - Causes & Fix

  30 May, 2026

  E13 means water leak or pressure-sensor air hose leak. Check under the tub for leaks and inspect the pressure hose for disconnects or cracks.

• Frigidaire E11 Error Code - Causes & Fix

  30 May, 2026

  E11 means your Frigidaire washer is not filling with water fast enough. Check water supply valves first, then inlet screens and hoses.

• Frigidaire Washer E4 Error Code - Causes & Fix

  30 May, 2026

  E4 means your Frigidaire washer detected an out-of-balance load and stopped the spin. Redistribute laundry evenly and check leveling.

• Frigidaire E1 Error Code - Causes & Fix

  30 May, 2026

  E1 on Frigidaire washers usually means slow or no fill. Check that both shutoff valves are fully open and inlet screens are clean.

• Frigidaire Oven F1 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F1 means a shorted keypad, the control reads a stuck key. Reset power first, then replace the electronic oven control if it returns.

• Frigidaire Oven F11 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F11 is a shorted keypad fault, the control reads a stuck key. Reset power, dry the panel, then replace the keypad or control board.

• Frigidaire Oven F2 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F2 means the oven read an extreme over-temperature. The usual fix is replacing the RTD temperature sensor after a multimeter check.

• Frigidaire Oven F30 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F30 is an open probe fault, the control lost the temperature reading. The usual fix is replacing the RTD oven temperature sensor.

• Frigidaire Oven F31 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F31 is a shorted probe fault, the sensor reads too low. The usual fix is replacing the RTD oven temperature sensor after a meter check.

• Frigidaire Oven F90 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F90 means the door unlock timed out after self-clean. The usual fix is replacing the motor door latch assembly that runs the lock.

• Frigidaire Oven F91 Error Code - Causes & Fix

  30 May, 2026

  Frigidaire F91 means the control hit the max door unlock attempts. The usual fix is replacing the motor door latch assembly that keeps stalling.