Tag: appliance
All the articles with the tag "appliance".
-
Kenmore Washer Clutch/Splutch Assembly Replacement
Washer agitates but won't spin, spins slowly, or makes grinding noise during spin. Replacing the worn clutch/splutch assembly restores spin.
-
Maytag Washer Agitator Dogs Replacement - Signs & How-To
Upper agitator slips or spins freely instead of ratcheting during wash. Replacing worn agitator dogs and cam restores one-way drive action.
-
Kenmore Washer Motor Coupler Replacement - Signs & How-To
A worn or broken motor coupler causes your Kenmore direct-drive washer to fill and drain but not agitate or spin. Replacing it restores power transfer.
-
LG Washer Drive Belt Replacement - Signs & How-To
Drum not spinning, motor runs but basket doesn't turn, or squealing noise means your belt is worn or broken. Replacing it restores spin.
-
Whirlpool Microwave Runs but No Heat - Causes & Fix
Usually a wrong setting (Control Lock, Demo Mode, or low power level) or a failed door switch, magnetron, or high-voltage diode.
-
Whirlpool Microwave Buttons Not Working - Causes & Fix
Control Lock is usually enabled or the unit needs a power reset. Disable the lock or reset the breaker for one minute to restore function.
-
Whirlpool Microwave Sparking - Causes & Fix
Most often caused by metal objects or grease buildup in the cavity. Remove all metal, clean thoroughly, and inspect the waveguide cover.
-
Whirlpool Microwave Won't Start - Causes & Fix
Most often a door-switch problem or control-lock setting. Check the door fully closes, clear the lock, and test door switches.
-
Whirlpool Microwave Not Heating - Causes & Fix
Demo Mode or Control Lock is active, or the door switch has failed. Exit Demo Mode, unlock controls, or test door switches.
-
Whirlpool Microwave Turntable Not Turning - Causes & Fix
Usually caused by incorrect turntable installation or debris blocking the roller ring. Check tray seating and clean the track first.
-
GE Microwave Runs But No Heat - Causes & Fix
Usually a failed magnetron or high-voltage diode. GE recommends service because the high-voltage capacitor stays charged even unplugged.
-
GE Microwave Buttons Not Working - Causes & Fix
Usually a stuck program sequence or incomplete entry. Cancel any delay-start, power reset for 30 seconds, then test buttons again.
-
GE Microwave Sparking - Causes & Fix
Most GE microwave sparking comes from metal objects left in the cavity or dirty, damaged waveguide covers. Remove metal, clean buildup, and inspect the cover.
-
GE Microwave Won't Start - Causes & Fix
Usually a blown line fuse inside the unit. Turn off the breaker, open the cabinet, and test the fuse for continuity with a multimeter.
-
GE Microwave Turntable Not Turning - Causes & Fix
Usually caused by a mis-seated tray, debris under the roller ring, or a failed turntable motor. Check alignment and clean first.
-
GE Microwave Not Heating - Causes & Fix
Most likely cause is a failed magnetron. A technician will test the magnetron, high-voltage diode, and capacitor after ruling out simple issues.
-
LG Microwave Runs but No Heat - Causes & Fix
A faulty magnetron is the most common cause when your LG microwave runs but does not heat. Replace the magnetron after safely discharging the capacitor.
-
LG Microwave Buttons Not Working - Causes & Fix
Child Lock is the most common cause. Hold START/ENTER for 4 seconds to unlock, then test. If still dead, power reset or service needed.
-
LG Microwave Sparking - Causes & Fix
Usually caused by food residue or metal in the cavity. Clean all surfaces and remove metal items, then test with microwave-safe dish.
-
LG Microwave Won't Start - Causes & Fix
Control Lock is usually active or the door isn't fully closed. Disable lock by holding CLEAR/OFF for 3 seconds, clean the latch, then retry.
-
LG Microwave Not Heating - Causes & Fix
A failed magnetron is the most common cause when your LG microwave runs but doesn't heat food. Replace the magnetron after verifying power and door switches.
-
LG Microwave Turntable Not Turning - Causes & Fix
Usually a mis-seated glass tray or damaged coupler. Remove the tray, check the coupler and roller guide for cracks, reinstall correctly.
-
Samsung Microwave Runs but No Heat - Causes & Fix
Demo mode is the most common cause. Press Options or My Settings, scroll to option 6, and set it to 2 to turn Demo mode off.
-
Samsung Microwave Buttons Not Working - Causes & Fix
Control Lock is usually active or the panel is dirty. Turn off Control Lock per your manual, clean and dry the panel, then test.