Tag: appliance
All the articles with the tag "appliance".
-
Samsung C-A1 Microwave Error - Causes & Fix
C-A1 means damper-sensing failure: the microwave cannot detect the damper opening or closing for 1 minute. Usually a stuck damper or bad motor.
-
Samsung C-70 Microwave Error - Causes & Fix
C-70 means steam sensor error. Reset by unplugging 60 seconds. If it returns after drying, the sensor or wiring usually needs replacement.
-
Samsung C-21 Microwave Error - Causes & Fix
C-21 means temperature sensor fault. Most often a failed sensor or wiring issue. Reset power for 60 seconds first, then check the sensor.
-
Samsung Dryer tS Error Code - Causes & Fix
tS code means thermistor/temperature-sensing fault. Most often caused by a failed exhaust thermistor or restricted airflow from lint buildup.
-
Samsung Dryer tO Error Code - Causes & Fix
Samsung tO code means a temperature sensor fault. Most common cause: clogged lint filter or vent trapping heat. Clean both first.
-
Samsung Dryer tE3 Error Code - Causes & Fix
tE3 means a temperature-sensing fault. Most often caused by clogged vents or lint screen restricting airflow and causing overheating.
-
Samsung Dryer tE Error Code - Causes & Fix
tE means a temperature-sensing fault. The dryer cannot read temperature correctly. Most likely cause: failed thermistor sensor.
-
Samsung Dryer t5 Error Code - Causes & Fix
t5 (tS/tC) means temperature-sensor error. Most common fix: clean lint screen and check exhaust vent for blockage or kinks.
-
Samsung Dryer t0 Error Code - Causes & Fix
t0 code means temperature-sensing fault or firmware download. Most common fix: clean lint screen and exhaust vent to restore airflow.
-
Samsung Dryer oD Error Code - Causes & Fix
oD means the cycle exceeded 240 minutes. Clean the lint filter and vent first, then check moisture sensors if airflow is clear.
-
Samsung Dryer hE Error Code - Causes & Fix
hE means a heating fault: the dryer isn't heating correctly or sees abnormal temperature. Most often caused by restricted airflow.
-
Samsung Dryer FC Error Code - Causes & Fix
FC means power-frequency fault: the dryer detects unstable incoming AC. Most common fix: reset the breaker and check connections.
-
Samsung Dryer E3 Error Code - Causes & Fix
E3 means internal parts cannot communicate. Power-reset the dryer for 60 seconds, clean the lint screen, and check for blocked vents.
-
Samsung Dryer E2 Error Code - Causes & Fix
E2 or 6E2 means a button is stuck or jammed on the control panel. Most often a physically stuck button or moisture under the keypad.
-
Samsung Dryer E1 Error Code - Causes & Fix
E1 means thermistor resistance is too low or shorted. Clean the lint filter and exhaust vent first, then check the thermistor.
-
Samsung Dryer dO Error Code - Causes & Fix
Samsung dO/dE/do/d0 means the door is not latching or the switch isn't confirming closure. Most often the door latch or strike is loose.
-
Samsung Dryer d0 Error Code - Causes & Fix
d0 means the dryer detects an open or unlatched door. Most often, clothing or lint blocks the latch. Close firmly and check the switch.
-
Samsung Dryer CLg Error Code - Causes & Fix
CLg means the vent system cannot exhaust properly. Most common fix: clean the lint screen and check for clogged or kinked ductwork.
-
Samsung Dryer CL1 Error Code - Causes & Fix
CL1 means laundry was detected in the drum during the Vent Blockage test. Empty the drum completely and restart the test to clear the code.
-
Samsung Dryer CG Error Code - Causes & Fix
CG (or Clg) means Samsung detected a clogged vent. Clean the lint filter thoroughly and check the entire exhaust duct for blockages.
-
Samsung Dryer C90 Error Code - Causes & Fix
C90 means your Samsung dryer detected over 90% vent blockage. Clean the lint filter and entire exhaust duct path to restore airflow.
-
Samsung Dryer C9 Error Code - Causes & Fix
C9 means your exhaust vent is about 90% clogged. Clean the lint filter and entire exhaust duct, then rerun the vent blockage test.
-
Samsung Dryer C80 Error Code - Causes & Fix
C80 means your Samsung dryer vent is about 80% clogged. Clean the lint filter and inspect the entire exhaust duct for blockages.
-
Samsung Dryer C8 Error Code - Causes & Fix
C8 means the vent is about 80% clogged. Clean the lint filter and check the entire exhaust duct for blockages or kinks.