Tag: appliance

All the articles with the tag "appliance".

• Electrolux Washer E52 Error - Causes & Fix

  14 Jun, 2026

  E52 means the control isn't receiving motor-speed feedback from the tacho sensor. Most often a failed tachogenerator or loose motor wiring.

• Electrolux E35 Error Code - Causes & Fix

  13 Jun, 2026

  E35 means the pressure sensor detects water overfill. Most often a stuck inlet valve or blocked pressure hose. Reset first.

• Electrolux Washer E21 Error Code - Causes & Fix

  13 Jun, 2026

  E21 means the washer isn't draining fast enough. The most common fix: clean the clogged drain filter on the underside of the machine.

• Kenmore Oven F9 Error Code - Causes & Fix

  13 Jun, 2026

  F9 means door-lock fault during self-clean. Most often a failed door latch assembly. Inspect the lock, reset power, or replace latch.

• Bosch Dishwasher E25 Error - Causes & Fix

  13 Jun, 2026

  E25 means a drain pump blockage or flow problem. Most common fix: clean the filter, sump, and pump cover, then reseat the cover firmly.

• Maytag Oven Lock Error Code - Causes & Fix

  13 Jun, 2026

  LOC or Locked means Control Lock is active, not a fault. Hold START/ENTER for 5 seconds to unlock. If it doesn't clear, power reset.

• Maytag Washer LF Error Code - Causes & Fix

  13 Jun, 2026

  LF means long fill: the washer isn't getting enough water fast enough. Check that both supply valves are fully open and clean the inlet screens.

• Maytag Washer LD Error Code - Causes & Fix

  13 Jun, 2026

  LD means Long Drain: water isn't leaving fast enough. Most often a kinked or clogged drain hose or debris in the pump inlet is slowing flow.

• Frigidaire F90 Error Code - Causes & Fix

  13 Jun, 2026

  F90 on Frigidaire ovens means a door lock fault. The door lock motor or latch mechanism is stuck, binding, or failed. Reset power first.

• Samsung Oven E-08 Error Code - Causes & Fix

  13 Jun, 2026

  E-08 means the oven is not heating or the control detects a heating-system failure. Most common cause: failed bake element or sensor.

• Samsung Washer OF Error Code - Causes & Fix

  12 Jun, 2026

  OF means overflow: water level rose too high or filling didn't stop. Most often a stuck inlet valve. Check valve, pressure hose, sensor.

• Whirlpool Dishwasher E6 Error Code - Causes & Fix

  12 Jun, 2026

  E6 means water supply fault or tap closed. Most often caused by a closed shutoff valve, kinked inlet hose, or clogged inlet screen.

• LG Washer dE2 Error Code - Causes & Fix

  12 Jun, 2026

  dE2 means the door is closed but not locked. Most often laundry blocking the latch or a worn door lock assembly. Check the seal and reset first.

• KitchenAid Microwave Buttons Not Working - Causes & Fix

  11 Jun, 2026

  Usually Control Lock is enabled or the control board needs a power reset. Turn off the breaker for 1 minute, then disable Control Lock.

• Frigidaire Microwave Door Won't Open - Causes & Fix

  11 Jun, 2026

  Usually a broken door latch or failed release spring. Unplug, remove the cover, inspect the latch assembly, and replace broken parts.

• Frigidaire Microwave Buttons Not Working - Causes & Fix

  11 Jun, 2026

  Usually a failed control board or membrane keypad. Power-cycle the unit, then check the keypad ribbon connection and door switches.

• Whirlpool Microwave Door Won't Open - Causes & Fix

  11 Jun, 2026

  Usually a stuck latch, broken door spring, or bent hook. Unplug, inspect the release mechanism and latch assembly for binding or damage.

• Whirlpool Microwave Making Loud Noise - Causes & Fix

  11 Jun, 2026

  Usually a shorted high-voltage diode or failing magnetron. Unplug, discharge the capacitor, test the HV diode first, then the magnetron.

• GE Microwave Door Won't Open - Causes & Fix

  11 Jun, 2026

  Broken latch actuator peg is the most common cause. The plastic peg snaps and the release button can't move the internal latch mechanism.

• Kenmore Oven Display Not Working - Causes & Fix

  10 Jun, 2026

  A dead display usually means the main control board isn't sending power to the display board. Check incoming power first, then replace the main control board if needed.

• Kenmore Oven Self-Clean Not Working - Causes & Fix

  10 Jun, 2026

  Usually a failed door lock assembly that won't latch or report locked status. Check that the door closes fully, then test the lock motor and switch.

• Kenmore Oven Door Won't Lock - Causes & Fix

  10 Jun, 2026

  A failed door lock motor or control board is usually why a Kenmore oven door won't lock. Replace the lock assembly or main control.

• Kenmore Oven Igniter Not Working - Causes & Fix

  10 Jun, 2026

  A weak hot-surface igniter that glows but doesn't draw enough current to open the gas valve is the most common cause. Replace the igniter.

• Kenmore Oven Broiler Not Working - Causes & Fix

  10 Jun, 2026

  Most often a burned-out broil element. Check the element for visible breaks or blistering, then test for continuity and replace if open.