Tag: amana

All the articles with the tag "amana".

• Amana Washer Lid Error Code - Causes & Fix

  10 Jun, 2026

  LdL means lid won't lock; LdU means lid won't unlock. Most common fix: remove obstructions from lid area and power-cycle washer.

• Amana Dryer F3 E2 Error Code - Causes & Fix

  10 Jun, 2026

  F3 E2 does not exist for Amana dryers. This code applies to Amana washers and indicates a water temperature sensor circuit fault.

• Amana Washer PF Error Code - Causes & Fix

  10 Jun, 2026

  PF means a power failure interrupted the cycle. Press and hold START to restart, or press POWER to clear the display.

• Amana LF Error Code - Causes & Fix

  10 Jun, 2026

  LF means the washer is not detecting the correct amount of incoming water. The most common fix is checking water supply valves and inlet screens.

• Amana Ld Error Code - Causes & Fix

  10 Jun, 2026

  Ld means long drain: water is taking too long to leave the tub. Most common fix: check the drain hose isn't pushed too far into the standpipe.

• Amana Washer LdU Error Code - Causes & Fix

  10 Jun, 2026

  LdU means the lid cannot unlock. Remove all items from the top of the washer, including laundry baskets, and clear any debris around the lid.

• Amana HC Error Code - Causes & Fix

  10 Jun, 2026

  HC means hot and cold water hoses are reversed on your Amana top-load washer. Swap the inlet hoses to the correct ports and run a test cycle.

• Amana Washer F9 E1 Error Code - Causes & Fix

  10 Jun, 2026

  F9 E1 means long drain (over 8 min). Usually a kinked or incorrectly installed drain hose. Check hose routing and standpipe first.

• Amana Washer F8 E2 Error Code - Causes & Fix

  10 Jun, 2026

  F8 E2 means the dispenser motor cannot move the detergent drawer. Most common fix: clean clogged drawer and housing with warm soapy water.

• Amana Washer F8 E1 Error Code - Causes & Fix

  10 Jun, 2026

  F8 E1 means your Amana washer isn't detecting incoming water. Most often a closed valve, kinked hose, or clogged inlet screen.

• Amana Washer F7 E1 Error Code - Causes & Fix

  10 Jun, 2026

  F7 E1 means the motor speed sensor cannot verify basket speed. Most common fix: remove shipping bolts or replace the shift actuator.

• Amana Washer F5 E2 Error Code - Causes & Fix

  10 Jun, 2026

  F5 E2 means the lid or door lock is not engaging properly. Most often the lid/door lock assembly has failed and needs replacement.

• Amana Washer dU Error Code - Causes & Fix

  10 Jun, 2026

  dU means the lid cannot unlock on Amana top-load HE washers. Most often caused by physical obstruction on the lid or a failed lid-lock assembly.

• Amana Washer DRN Error Code - Causes & Fix

  10 Jun, 2026

  DRN means washer not draining properly. Most common fix: check for kinked drain hose or hose inserted too far into standpipe.

• Amana Dryer PF Error Code - Causes & Fix

  10 Jun, 2026

  PF means power failure. The cycle was interrupted by lost power. Press POWER to clear or hold START to restart the cycle.

• Amana dLO Error Code - Causes & Fix

  10 Jun, 2026

  dLO means a long-drain fault: the washer can't pump water out fast enough. Check for a kinked or clogged drain hose first.

• Amana Dryer FC E1 Error Code - Causes & Fix

  10 Jun, 2026

  FC E1 on an Amana dryer indicates a communication or control fault. Reset the breaker for 5 minutes, then run a timed dry cycle.

• Amana Dryer L2 Error Code - Causes & Fix

  10 Jun, 2026

  L2 means low or no line voltage to your Amana dryer. Check if one of the two breakers tripped or a fuse blew at the panel.

• Amana Dryer F72–F78 Error Code - Causes & Fix

  10 Jun, 2026

  F72–F78 means a user interface or control panel failure. Power off the breaker for 5 minutes and restart. If it returns, service required.

• Amana Dryer F71 Error Code - Causes & Fix

  10 Jun, 2026

  F71 on an Amana dryer is a control communication fault. The most likely fix is a loose wire or a failed main control board.

• Amana Dryer F70 Error Code - Causes & Fix

  10 Jun, 2026

  F70 is a communication error between the dryer console and main control board. Power reset the unit for 1 minute, then check connectors.

• Amana Dryer F6E3 Error Code - Causes & Fix

  10 Jun, 2026

  F6E3 means a voltage sensing or power supply error in the dryer's electronics. Most common fix: a 5-minute power reset at the breaker.

• Amana Dryer F6 E2 Error Code - Causes & Fix

  10 Jun, 2026

  F6 E2 means the main control board and user interface lost communication. Power-cycle at the breaker for 5 minutes first.

• Amana Dryer F4 E4 Error Code - Causes & Fix

  10 Jun, 2026

  F4 E4 means low or no line voltage reaching your Amana dryer. Most often one breaker is tripped or a fuse is blown on the circuit.