Posts

All the articles I've posted.

• Samsung Dryer C9 Error Code - Causes & Fix

  5 Jun, 2026

  C9 means your exhaust vent is about 90% clogged. Clean the lint filter and entire exhaust duct, then rerun the vent blockage test.

• Samsung Dryer C80 Error Code - Causes & Fix

  5 Jun, 2026

  C80 means your Samsung dryer vent is about 80% clogged. Clean the lint filter and inspect the entire exhaust duct for blockages.

• Samsung Dryer C8 Error Code - Causes & Fix

  5 Jun, 2026

  C8 means the vent is about 80% clogged. Clean the lint filter and check the entire exhaust duct for blockages or kinks.

• Samsung Dryer C1 Error Code - Causes & Fix

  5 Jun, 2026

  C1/CL1 means the dryer detects laundry in the drum when it expects it empty. Remove all items, power-cycle the unit, and restart.

• Samsung Dryer bE2 Error Code - Causes & Fix

  5 Jun, 2026

  bE2 means a stuck, jammed, or continuously pressed button on the control panel. Most often a physical button jam or residue.

• Samsung Dryer bE Error Code - Causes & Fix

  5 Jun, 2026

  bE means a button is stuck or continuously pressed. Press each button to free it, then unplug for 60 seconds and restart the dryer.

• Samsung Dryer AE5 Error Code - Causes & Fix

  5 Jun, 2026

  AE5 is a communication error between internal boards. Power-cycle the dryer first. If it persists, check wiring or replace boards.

• Samsung Dryer AE4 Error Code - Causes & Fix

  5 Jun, 2026

  AE4 means a communication error between control components. Power off 2-3 minutes and restart. If it returns, inspect wiring harness.

• Samsung Dryer AE3 Error Code - Causes & Fix

  5 Jun, 2026

  AE3 means internal component communication failure. Most often a control glitch fixed by unplugging 60 seconds, or loose wiring between boards.

• Samsung Dryer AC7 Error Code - Causes & Fix

  5 Jun, 2026

  AC7 means an electronic control or internal communication error. Most often fixed by a power reset or reseating control board connectors.

• Samsung Dryer AC Error Code - Causes & Fix

  5 Jun, 2026

  AC code means communication failure between the main control and inverter/compressor module. Most common fix: reseat connectors or replace a board.

• Samsung Dishwasher tC Error Code - Causes & Fix

  5 Jun, 2026

  tC means temperature sensor error or inaccurate reading. Most likely fix: replace the thermistor or repair its wiring harness.

• Samsung Dishwasher OC Error Code - Causes & Fix

  5 Jun, 2026

  OC/oC means overflow or over-level water detected. Usually a clogged filter or kinked drain hose. Clean the filter and check the drain path.

• Samsung Dishwasher LE Error Code - Causes & Fix

  5 Jun, 2026

  LE code means leak or moisture detected in the base pan. Most often caused by drain hose, supply line, or door seal leaks.

• Samsung Dishwasher LC Error Code - Causes & Fix

  5 Jun, 2026

  LC means moisture detected in the base pan. Most often a loose water supply hose fitting or worn door seal. Shut off power, inspect, dry.

• Samsung Dishwasher CE Error Code - Causes & Fix

  5 Jun, 2026

  CE means control panel communication error. Power-cycle the dishwasher first. If code returns, replace control panel or main board.

• Samsung Dishwasher bE Error Code - Causes & Fix

  5 Jun, 2026

  Samsung bE code means a stuck or continuously pressed button is detected. The most common fix is cleaning the control panel and testing each button.

• Samsung Dishwasher AP Error Code - Causes & Fix

  5 Jun, 2026

  AP means Access Point (Wi-Fi pairing mode), not a mechanical fault. Turn the dishwasher off and back on to clear it and resume normal use.

• Samsung Dishwasher 3E Error Code - Causes & Fix

  5 Jun, 2026

  3E means high temperature water supply error. The incoming hot water is too hot. Lower your water heater below 176°F (80°C) and reset.

• Yaskawa GA800 E36 Fault - Causes & Fix

  5 Jun, 2026

  E36 on a Yaskawa GA800 VFD means the Safe Torque Off circuit is open or not satisfied. Most often, check the STO jumper or safety relay.

• Yaskawa GA800 E34 Fault Code - Causes & Fix

  5 Jun, 2026

  E34 is a soft-charge answerback fault on the GA800 VFD. The drive expected the precharge relay to signal completion but got no feedback.

• Yaskawa GA800 E32 Fault - Causes & Fix

  5 Jun, 2026

  E32 on Yaskawa GA800 means soft-charge bypass relay answerback fault. Most often caused by worn relay or failed control board.

• Yaskawa GA800 E31 Fault - Causes & Fix

  5 Jun, 2026

  E31 on a Yaskawa GA800 VFD means the Safe Torque Off (STO) safety circuit is open. Check the STO jumper or external safety relay.

• Yaskawa GA800 E29 Fault - Causes & Fix

  5 Jun, 2026

  E29 is a soft-charge answerback fault on the Yaskawa GA800 VFD. The most likely fix is replacing the precharge bypass relay or control board.