Posts
All the articles I've posted.
-
Whirlpool Refrigerator Not Cooling - Causes & Fix
Dirty condenser coils are the most common cause. Clean the coils at the rear or bottom of the cabinet to restore heat rejection.
-
LG Refrigerator Not Making Ice - Causes & Fix
Usually the ice maker is switched off or the freezer isn't cold enough. Turn it on, check freezer temp is below 0°F, and test the maker.
-
LG Refrigerator Water Dispenser Not Working - Causes & Fix
Control Lock is usually engaged. Hold the lock button for 3 seconds to unlock. If that doesn't work, check the door switch and water supply.
-
LG Refrigerator Ice Maker Not Working - Causes & Fix
Ice maker is usually switched off at the control panel or water supply is blocked. Turn on the ice maker and check the shutoff valve.
-
LG Refrigerator Not Cooling - Causes & Fix
Blocked vents or dirty condenser coils usually stop cooling. Clear airflow, clean coils, and reset the unit to restore function.
-
Samsung Refrigerator Not Making Ice - Causes & Fix
Usually the ice maker is turned off in settings or the freezer is too warm. Check the control panel first, then verify temperature.
-
Samsung Refrigerator Leaking Water - Causes & Fix
Most leaks come from a blocked or frozen defrost drain that prevents water from flowing out during defrost cycles. Clear the drain and flush with warm water.
-
Samsung Refrigerator Water Dispenser Not Working - Causes & Fix
Control Lock is usually on or the water filter is clogged. Unlock the panel, replace the filter, and purge air for up to 5 minutes.
-
Samsung Refrigerator Ice Maker Not Working - Causes & Fix
Most often the ice maker is turned off or the water filter is clogged. Check the ICE ON setting and replace the filter first.
-
Samsung Refrigerator Not Cooling - Causes & Fix
Most often caused by Cooling Off Mode being active or blocked vents. Check mode settings, clear obstructions, and power cycle the unit.
-
Kenmore Dryer Shuts Off Early - Causes & Fix
Blocked vent or lint buildup causes overheating and early shutoff. Clean the lint trap, inspect the entire exhaust path, and test the high-limit thermostat.
-
Maytag Dryer Won't Start - Causes & Fix
Most often a failed door switch or blown thermal fuse. Check power, door latch, control lock, then test the switch and fuse.
-
Whirlpool Dryer Squeaking - Causes & Fix
Squeaking usually comes from a worn idler pulley or lint buildup on belts and pulleys. Check leveling, clean lint, and inspect pulleys.
-
LG Dryer No Power - Causes & Fix
Most often a tripped circuit breaker or loose power cord. Reset the breaker, check the cord connection at the outlet and dryer, then test.
-
Maytag Washer Door Won't Unlock - Causes & Fix
Water still in the tub or Fresh Hold active. Press Cancel/Power, wait two minutes, then run Drain & Spin to empty the washer.
-
LG Washer Won't Drain - Causes & Fix
A clogged drain pump filter or coin trap is the most common cause. Unplug the washer, drain residual water, remove and clean the filter, then test a spin cycle.
-
Samsung Washer Shaking and Loud - Causes & Fix
Usually caused by shipping bolts still installed or washer not level. Check for rigid drum movement and verify all feet contact floor.
-
Samsung Washer Won't Fill with Water - Causes & Fix
Usually a clogged inlet screen or kinked hose. Check supply valves, clean the hose filters at the machine connection, and test the inlet valve.
-
Samsung Washer Won't Drain - Causes & Fix
A clogged drain pump filter is the most common culprit. Pull the front access panel, unscrew the filter, clear any debris, and test a drain cycle.
-
State Water Heater E74 Error Code - Causes & Fix
E74 on State water heaters is not documented in official sources. Verify your exact model and display code before attempting repairs.
-
Ruud E03 Error Code - Causes & Fix
E03 on a Ruud tankless water heater means overheat shutdown. Usually caused by low water flow or scale buildup in the heat exchanger.
-
Ruud E02 Error Code - Causes & Fix
E02 means high-temperature or overheat fault. The water heater detected unsafe heat and shut down. Lower the setpoint or check sensors.
-
Bosch E1 Error Code - Causes & Fix
E1 means the hot water sensor detected over-temperature (above 185°F). Most often caused by scale buildup or a faulty sensor.
-
Siemens G120 F01625 - Causes & Fix
F01625 means a sign-of-life error in safety data on your G120 drive. Most often caused by EMC interference or wiring issues.